p gingivalis atcc baa 1703  (ATCC)

Journal: Infection Prevention in Practice

Article Title: A novel method of simulated-use surface disinfection efficacy testing as Phase 3 Step 1 approach

doi: 10.1016/j.infpip.2026.100511

Figure Lengend Snippet: Recovery of A. baumannii from the PCS (black bars), from the SCS drying controls (Dc t30 ) (dark grey bars) and the SCS water controls (N W ) (light grey bars) after 30 min in a simulated-use test on ABS plates with initial cell counts between 10 6 and 10 10 cfu/mL ( N = 4). Only initial cell counts of 10 9 and 10 10 cfu/mL yield bacterial recovery within validation limits. ABS, acrylonitrile butadiene styrene; PCS, primary contaminated surface; SCS, secondary contaminated surface.

Article Snippet: Surface material validation used a clinical isolate of A. baumannii , while disinfectant application was validated using S. aureus ATCC 6538.

Techniques: Biomarker Discovery

Journal: Infection Prevention in Practice

Article Title: A novel method of simulated-use surface disinfection efficacy testing as Phase 3 Step 1 approach

doi: 10.1016/j.infpip.2026.100511

Figure Lengend Snippet: Recovery of A. baumannii after drying (Dc t ) and water controls (N W ) with 0 (black bars) and 30 min drying time (light grey bars) and 30 min exposure time (dark grey bars) in a simulated-use test on ABS, stainless steel and melamine plates with Multitex ® wipes ( N = 6). Dotted lines mark the minimum recovery in the water and drying controls set for the simulated-use test. There were no significant differences between the three surface materials.

Article Snippet: Surface material validation used a clinical isolate of A. baumannii , while disinfectant application was validated using S. aureus ATCC 6538.

Techniques:

Journal: Infection Prevention in Practice

Article Title: A novel method of simulated-use surface disinfection efficacy testing as Phase 3 Step 1 approach

doi: 10.1016/j.infpip.2026.100511

Figure Lengend Snippet: Recovery of A. baumannii from the PCS (black bars), from the SCS drying controls (Dc t30 ) (dark grey bars) and the SCS water controls (N W ) (light grey bars) after 30 min in a simulated-use test on ABS plates with initial cell counts between 10 6 and 10 10 cfu/mL ( N = 4). Only initial cell counts of 10 9 and 10 10 cfu/mL yield bacterial recovery within validation limits. ABS, acrylonitrile butadiene styrene; PCS, primary contaminated surface; SCS, secondary contaminated surface.

Article Snippet: Test surfaces were contaminated with either i) a clinical isolate – methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant Enterococcus faecium (VRE) or Acinetobacter baumannii , ii) the reference strain Staphylococcus aureus ATCC 6538 or iii) a mixed inoculum consisting of MRSA and VRE.

Techniques: Biomarker Discovery

Journal: Infection Prevention in Practice

Article Title: A novel method of simulated-use surface disinfection efficacy testing as Phase 3 Step 1 approach

doi: 10.1016/j.infpip.2026.100511

Figure Lengend Snippet: Recovery of A. baumannii after drying (Dc t ) and water controls (N W ) with 0 (black bars) and 30 min drying time (light grey bars) and 30 min exposure time (dark grey bars) in a simulated-use test on ABS, stainless steel and melamine plates with Multitex ® wipes ( N = 6). Dotted lines mark the minimum recovery in the water and drying controls set for the simulated-use test. There were no significant differences between the three surface materials.

Article Snippet: Test surfaces were contaminated with either i) a clinical isolate – methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant Enterococcus faecium (VRE) or Acinetobacter baumannii , ii) the reference strain Staphylococcus aureus ATCC 6538 or iii) a mixed inoculum consisting of MRSA and VRE.

Techniques: