Review

bio rad s proteon xpr36 array biosensor (Bio-Rad)

Bio-Rad is a verified supplier

About

News

Press Release

Team

Advisors

Partners

Contact

Bioz Stars

Bioz vStars

Buy from Supplier

Structured Review

Bio-Rad bio rad s proteon xpr36 array biosensor
Bio Rad S Proteon Xpr36 Array Biosensor, supplied by Bio-Rad, used in various techniques. Bioz Stars score: 96/100, based on 565 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/spr+biosensor+analysis/ProteOn+XPR36+Protein+Interaction+Array+System/pmc02865728-193-8-8
Average 96 stars, based on 565 article reviews

bio rad s proteon xpr36 array biosensor - by Bioz Stars, 2026-09

96/100 stars

Images

other:

Article Title: Influence of SmpB and ClpX interactions and interactomes on the transcription profile of Mycobacterium tuberculosis
Article Snippet: These experiments were also performed in the presence of SSB and SmpB using an amine coupling chip using the ProteON XPR36 Protein Interaction Array System (Biorad, Inc).

Article Title: Nutrient Availability Dictates Cancer Metabolism–Based Therapeutic Responses to Nononcology Drugs
Article Snippet: The interaction studies between BY03 and TEAD1 were carried out using the ProteOn XPR36 Protein Interaction Array System (Bio-Rad).

SPR Assay:

Article Title: TPP-45142—an Anti-HER2 T-cell Engager—Designed for Selective HER2-Low Cancer Immunotherapy
Article Snippet: .. The affinity of 27A05 and 29E09 with human, cynomolgus monkey (cyno) and mouse HER2 proteins was determined using surface plasmon resonance (SPR) on a ProteOn XPR36 protein interaction array system (BioRad Laboratories, Inc) at 25°C. .. Human, cyno, and mouse HER2 Fc proteins were immobilized on a ProteOn GLC sensor chip (BioRad Laboratories, Inc. cat. #176-5011; 20 μg/mL, 10 mmol/L acetate pH 4.0, 120 seconds, 30 μL/minute).

Article Title: Discovery of 4‐Quinazolinone‐Containing Phenylalanine Derivatives as Potent, Resistant‐Tolerant HIV Capsid Inhibitors
Article Snippet: .. All experiments were conducted using a ProteOn XPR36 SPR Protein Interaction Array System (Bio‐Rad Laboratories, Hercules, CA) at a constant temperature of 25°C. ..

Article Title: TPP-45142—an Anti-HER2 T cell Engager—Designed for Selective HER2-Low Cancer Immunotherapy
Article Snippet: .. 178 179 180 Affinity determination 181 D ow nloaded from http://aacrjournals.org/m ct/article-pdf/doi/10.1158/1535-7163.M C T-25-0654/3724849/m ct-25-0654.pdf by guest on 12 January 2026 6 The affinity of 27A05 and 29E09 with human and cynomolgus monkey (cyno) proteins was 182 determined using surface plasmon resonance (SPR) on a ProteOn XPR36 protein interaction array 183 system (BioRad Laboratories, Inc. [California, USA]) at 25°C. .. Human, cyno, and mouse HER-2 Fc 184 proteins were immobilized on a ProteOn GLC sensor chip (BioRad Laboratories, Inc. catalog #176-185 5011; 20 μg/mL, 10 mM acetate pH 4.0, 120 s, 30 μL/min).

Binding Assay:

Article Title: Revealing erythropoietin variant EV-3 as novel driving force and immunotherapeutic target in human glioblastoma
Article Snippet: .. Binding studies were through ProteOn XPR36 Protein Interaction Array system (Bio-Rad Laboratories, Segrate, Milan, Italy). ..

Article Title: Revealing erythropoietin variant EV-3 as novel driving force and immunotherapeutic target in human glioblastoma.
Article Snippet: .. Binding studies were through ProteOn 356 XPR36 Protein Interaction Array system (Bio-Rad Laboratories, Segrate, Milan, 357 Italy). ..

Image Search Results

Chemical modification of lysine residues in the FVIII light chain abolishes the interaction with LRP1 cluster II. Association and dissociation of LRP1 cluster II to FVIII light chain were assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB). The anti-C2 antibody CLB-EL14 IgG4 (26 fmol/mm−2) was immobilized onto a CM5 sensor chip using the amine coupling method according to the manufacturer's instructions. Subsequently, FVIII light chain was bound to the anti-C2 antibody at a density of 17 fmol/mm−2. To study the contribution of lysine residues on the interaction between LRP1 cluster II and the FVIII light chain, lysine residues were modified by passing over 50 mm sulfo-NHS acetate or sulfo-NHS biotin (Thermo Fisher Scientific) for 10 min at 25 °C with a flow rate of 20 μl/min. A and B, LRP1 cluster II (0.2–200 nm) (A) and anti-a3 antibody CLB-CAg69 (0.1–100 nm) (B) were passed over the FVIII light chain in a buffer containing 150 mm NaCl, 5 mm CaCl2, 0.005% (v/v) Tween 20, and 20 mm Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of LRP1 cluster II using the same buffer containing 1 m NaCl. Binding to FVIII light chain was corrected for binding in the absence of FVIII. The response at 235 s after association is plotted as a function of the concentration.

Journal: The Journal of Biological Chemistry

Article Title: Factor VIII Interacts with the Endocytic Receptor Low-density Lipoprotein Receptor-related Protein 1 via an Extended Surface Comprising “Hot-Spot” Lysine Residues ^♦

doi: 10.1074/jbc.M115.650911

Figure Lengend Snippet: Chemical modification of lysine residues in the FVIII light chain abolishes the interaction with LRP1 cluster II. Association and dissociation of LRP1 cluster II to FVIII light chain were assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB). The anti-C2 antibody CLB-EL14 IgG4 (26 fmol/mm−2) was immobilized onto a CM5 sensor chip using the amine coupling method according to the manufacturer's instructions. Subsequently, FVIII light chain was bound to the anti-C2 antibody at a density of 17 fmol/mm−2. To study the contribution of lysine residues on the interaction between LRP1 cluster II and the FVIII light chain, lysine residues were modified by passing over 50 mm sulfo-NHS acetate or sulfo-NHS biotin (Thermo Fisher Scientific) for 10 min at 25 °C with a flow rate of 20 μl/min. A and B, LRP1 cluster II (0.2–200 nm) (A) and anti-a3 antibody CLB-CAg69 (0.1–100 nm) (B) were passed over the FVIII light chain in a buffer containing 150 mm NaCl, 5 mm CaCl2, 0.005% (v/v) Tween 20, and 20 mm Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of LRP1 cluster II using the same buffer containing 1 m NaCl. Binding to FVIII light chain was corrected for binding in the absence of FVIII. The response at 235 s after association is plotted as a function of the concentration.

Article Snippet: Surface Plasmon Resonance Analysis Association and dissociation of LRP1 cluster II to FVIII light chain and FVIIIdB variants were assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB, Uppsala, Sweden).

Techniques: Modification, Concentration Assay, Binding Assay

Library of lysine to arginine replacements in the FVIII light chain identifies the contribution of multiple lysine residues in the interaction with LRP1 cluster II. Association and dissociation of LRP1 cluster II to FVIII light chain variants were assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB). The anti-C2 antibody CLB-EL14 IgG4 (26 fmol/mm−2) was immobilized onto a CM5 sensor chip using the amine coupling method according to the manufacturer's instructions. Subsequently, FVIII light chain variants were bound to the anti-C2 antibody at a density of 17 fmol/mm−2. LRP1 cluster II (0.2–200 nm) was passed over the FVIII light chain variants in a buffer containing 150 mm NaCl, 5 mm CaCl2, 0.005% (v/v) Tween 20, and 20 mm Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of LRP1 cluster II using the same buffer containing 1 m NaCl. Binding to FVIII light chain variants was corrected for binding in the absence of FVIII. Binding data during the association phase were fitted in a one-phase exponential association model. A, representative experiment for the interaction between LRP1 cluster II and wild type FVIII light chain. B, on each SPR sensor chip, we included a control channel (only CLB-EL14 IgG4), wild type FVIII light chain, and two FVIII light chain variants. Therefore, wild type FVIII light chain was analyzed multiple times (n = 14) C and D, representative experiments for variants. E, the KD for LRP1 cluster II for the FVIII light chain variants was compared with the KD of wild type FVIII light chain (n = 14, degrees of freedom = 13, *, p < 0.10, t value = 2.16, ***, p <0.001, t value = 4.22) using a two-tailed Student's t test. Error bars indicate ± S.D.

Journal: The Journal of Biological Chemistry

Article Title: Factor VIII Interacts with the Endocytic Receptor Low-density Lipoprotein Receptor-related Protein 1 via an Extended Surface Comprising “Hot-Spot” Lysine Residues ^♦

doi: 10.1074/jbc.M115.650911

Figure Lengend Snippet: Library of lysine to arginine replacements in the FVIII light chain identifies the contribution of multiple lysine residues in the interaction with LRP1 cluster II. Association and dissociation of LRP1 cluster II to FVIII light chain variants were assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB). The anti-C2 antibody CLB-EL14 IgG4 (26 fmol/mm−2) was immobilized onto a CM5 sensor chip using the amine coupling method according to the manufacturer's instructions. Subsequently, FVIII light chain variants were bound to the anti-C2 antibody at a density of 17 fmol/mm−2. LRP1 cluster II (0.2–200 nm) was passed over the FVIII light chain variants in a buffer containing 150 mm NaCl, 5 mm CaCl2, 0.005% (v/v) Tween 20, and 20 mm Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of LRP1 cluster II using the same buffer containing 1 m NaCl. Binding to FVIII light chain variants was corrected for binding in the absence of FVIII. Binding data during the association phase were fitted in a one-phase exponential association model. A, representative experiment for the interaction between LRP1 cluster II and wild type FVIII light chain. B, on each SPR sensor chip, we included a control channel (only CLB-EL14 IgG4), wild type FVIII light chain, and two FVIII light chain variants. Therefore, wild type FVIII light chain was analyzed multiple times (n = 14) C and D, representative experiments for variants. E, the KD for LRP1 cluster II for the FVIII light chain variants was compared with the KD of wild type FVIII light chain (n = 14, degrees of freedom = 13, *, p < 0.10, t value = 2.16, ***, p <0.001, t value = 4.22) using a two-tailed Student's t test. Error bars indicate ± S.D.

Techniques: Concentration Assay, Binding Assay, Control, Two Tailed Test

Lysine to alanine and lysine to glutamic acid replacements at position 1693, 1827, 1967, 2065, and 2092. Association and dissociation of LRP1 cluster II to FVIII light chain variants Lys1693, Lys1827, Lys1967, Lys2065, and Lys2092 were assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB). The anti-C2 antibody CLB-EL14 IgG4 (26 fmol/mm−2) was immobilized onto a CM5 sensor chip using the amine coupling method according to the manufacturer's instructions. Subsequently, FVIII light chain variants were bound to the anti-C2 antibody at a density of 17 fmol/mm−2. LRP1 cluster II (0.2–200 nm) was passed over the FVIII light chain variants in a buffer containing 150 mm NaCl, 5 mm CaCl2, 0.005% (v/v) Tween 20, and 20 mm Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of LRP1 cluster II using the same buffer containing 1 m NaCl. Binding to FVIII light chain variants was corrected for binding in the absence of FVIII. Binding data during the association phase were fitted in a one-phase exponential association model.

Journal: The Journal of Biological Chemistry

Article Title: Factor VIII Interacts with the Endocytic Receptor Low-density Lipoprotein Receptor-related Protein 1 via an Extended Surface Comprising “Hot-Spot” Lysine Residues ^♦

doi: 10.1074/jbc.M115.650911

Figure Lengend Snippet: Lysine to alanine and lysine to glutamic acid replacements at position 1693, 1827, 1967, 2065, and 2092. Association and dissociation of LRP1 cluster II to FVIII light chain variants Lys1693, Lys1827, Lys1967, Lys2065, and Lys2092 were assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB). The anti-C2 antibody CLB-EL14 IgG4 (26 fmol/mm−2) was immobilized onto a CM5 sensor chip using the amine coupling method according to the manufacturer's instructions. Subsequently, FVIII light chain variants were bound to the anti-C2 antibody at a density of 17 fmol/mm−2. LRP1 cluster II (0.2–200 nm) was passed over the FVIII light chain variants in a buffer containing 150 mm NaCl, 5 mm CaCl2, 0.005% (v/v) Tween 20, and 20 mm Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of LRP1 cluster II using the same buffer containing 1 m NaCl. Binding to FVIII light chain variants was corrected for binding in the absence of FVIII. Binding data during the association phase were fitted in a one-phase exponential association model.

Techniques: Concentration Assay, Binding Assay

Effect of replacement of lysine residues by positively charged arginine, uncharged alanine, or negatively charged glutamic acid on the interaction between the FVIII light chain and LRP1 cluster II Association and dissociation of LRP1 cluster II to FVIII light chain variants Lys-1693, Lys-1827, Lys-1967, Lys-2065, and Lys-2092 was assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB, Uppsala, Sweden). The anti-C2 antibody CLB-EL14 IgG4 (26 fmol/mm −2 ) was immobilized onto a CM5 sensor chip using the amine coupling method according to the manufacturer's instructions. Subsequently, FVIII light chain variants were bound to the anti-C2 antibody at a density of 17 fmol/mm −2 . LRP1 cluster II (0.2–200 n m ) was passed over the FVIII light chain variants in a buffer containing 150 m m NaCl, 5 m m CaCl 2 , 0.005% (v/v) Tween 20, and 20 m m Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of LRP1 cluster II using the same buffer containing 1 m NaCl. Binding to FVIII light chain variants was corrected for binding in absence of FVIII. Binding data during the association phase were fitted in a one-phase exponential association model. ND, not determined.

Journal: The Journal of Biological Chemistry

Article Title: Factor VIII Interacts with the Endocytic Receptor Low-density Lipoprotein Receptor-related Protein 1 via an Extended Surface Comprising “Hot-Spot” Lysine Residues ^♦

doi: 10.1074/jbc.M115.650911

Figure Lengend Snippet: Effect of replacement of lysine residues by positively charged arginine, uncharged alanine, or negatively charged glutamic acid on the interaction between the FVIII light chain and LRP1 cluster II Association and dissociation of LRP1 cluster II to FVIII light chain variants Lys-1693, Lys-1827, Lys-1967, Lys-2065, and Lys-2092 was assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB, Uppsala, Sweden). The anti-C2 antibody CLB-EL14 IgG4 (26 fmol/mm −2 ) was immobilized onto a CM5 sensor chip using the amine coupling method according to the manufacturer's instructions. Subsequently, FVIII light chain variants were bound to the anti-C2 antibody at a density of 17 fmol/mm −2 . LRP1 cluster II (0.2–200 n m ) was passed over the FVIII light chain variants in a buffer containing 150 m m NaCl, 5 m m CaCl 2 , 0.005% (v/v) Tween 20, and 20 m m Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of LRP1 cluster II using the same buffer containing 1 m NaCl. Binding to FVIII light chain variants was corrected for binding in absence of FVIII. Binding data during the association phase were fitted in a one-phase exponential association model. ND, not determined.

Techniques: Concentration Assay, Binding Assay

Combined lysine replacements have an additive effect on LRP1 cluster II interaction. Association and dissociation of LRP1 cluster II to FVIII light chain variants carrying replacements at positions Lys1693, Lys1827, and Lys1967 (A3), Lys2065 and Lys2092 (C1), and Lys1693, Lys1827, Lys1967, Lys2065, and Lys2092 (A3C1) were assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB). The anti-C2 antibody CLB-EL14 IgG4 (26 fmol/mm−2) was immobilized onto a CM5 sensor chip using the amine coupling method according to the manufacturer's instructions. Subsequently, FVIII light chain variants were bound to the anti-C2 antibody at a density of 17 fmol/mm−2. LRP1 cluster II (0.2–200 nm) was passed over the FVIII light chain variants in a buffer containing 150 mm NaCl, 5 mm CaCl2, 0.005% (v/v) Tween 20, and 20 mm Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of LRP1 cluster II using the same buffer containing 1 m NaCl. Binding to FVIII light chain variants was corrected for binding in the absence of FVIII. Binding data during the association phase were fitted in a one-phase exponential association model.

Journal: The Journal of Biological Chemistry

Article Title: Factor VIII Interacts with the Endocytic Receptor Low-density Lipoprotein Receptor-related Protein 1 via an Extended Surface Comprising “Hot-Spot” Lysine Residues ^♦

doi: 10.1074/jbc.M115.650911

Figure Lengend Snippet: Combined lysine replacements have an additive effect on LRP1 cluster II interaction. Association and dissociation of LRP1 cluster II to FVIII light chain variants carrying replacements at positions Lys1693, Lys1827, and Lys1967 (A3), Lys2065 and Lys2092 (C1), and Lys1693, Lys1827, Lys1967, Lys2065, and Lys2092 (A3C1) were assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB). The anti-C2 antibody CLB-EL14 IgG4 (26 fmol/mm−2) was immobilized onto a CM5 sensor chip using the amine coupling method according to the manufacturer's instructions. Subsequently, FVIII light chain variants were bound to the anti-C2 antibody at a density of 17 fmol/mm−2. LRP1 cluster II (0.2–200 nm) was passed over the FVIII light chain variants in a buffer containing 150 mm NaCl, 5 mm CaCl2, 0.005% (v/v) Tween 20, and 20 mm Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of LRP1 cluster II using the same buffer containing 1 m NaCl. Binding to FVIII light chain variants was corrected for binding in the absence of FVIII. Binding data during the association phase were fitted in a one-phase exponential association model.

Techniques: Concentration Assay, Binding Assay

Effect of combining lysine replacements on the interaction between the FVIII light chain and LRP1 cluster II Association and dissociation of LRP1 cluster II to FVIII light chain variants carrying replacements at positions Lys-1693, Lys-1827, and Lys-1967 (A3), Lys-2065 and Lys-2092 (C1), and Lys-1693, Lys-1827, Lys-1967, Lys-2065, and Lys-2092 (A3C1) was assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB, Uppsala, Sweden). The anti-C2 antibody CLB-EL14 IgG4 (26 fmol/mm −2 ) was immobilized onto a CM5 sensor chip using the amine coupling method according to the manufacturer's instructions. Subsequently, FVIII light chain variants were bound to the anti-C2 antibody at a density of 17 fmol/mm −2 . LRP1 cluster II (0.2–200 n m ) was passed over the FVIII light chain variants in a buffer containing 150 m m NaCl, 5 m m CaCl 2 , 0.005% (v/v) Tween 20, and 20 m m Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of LRP1 cluster II using the same buffer containing 1 m NaCl. Binding to FVIII light chain variants was corrected for binding in absence of FVIII. Binding data during the association phase were fitted in a one-phase exponential association model.

Journal: The Journal of Biological Chemistry

Article Title: Factor VIII Interacts with the Endocytic Receptor Low-density Lipoprotein Receptor-related Protein 1 via an Extended Surface Comprising “Hot-Spot” Lysine Residues ^♦

doi: 10.1074/jbc.M115.650911

Figure Lengend Snippet: Effect of combining lysine replacements on the interaction between the FVIII light chain and LRP1 cluster II Association and dissociation of LRP1 cluster II to FVIII light chain variants carrying replacements at positions Lys-1693, Lys-1827, and Lys-1967 (A3), Lys-2065 and Lys-2092 (C1), and Lys-1693, Lys-1827, Lys-1967, Lys-2065, and Lys-2092 (A3C1) was assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB, Uppsala, Sweden). The anti-C2 antibody CLB-EL14 IgG4 (26 fmol/mm −2 ) was immobilized onto a CM5 sensor chip using the amine coupling method according to the manufacturer's instructions. Subsequently, FVIII light chain variants were bound to the anti-C2 antibody at a density of 17 fmol/mm −2 . LRP1 cluster II (0.2–200 n m ) was passed over the FVIII light chain variants in a buffer containing 150 m m NaCl, 5 m m CaCl 2 , 0.005% (v/v) Tween 20, and 20 m m Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of LRP1 cluster II using the same buffer containing 1 m NaCl. Binding to FVIII light chain variants was corrected for binding in absence of FVIII. Binding data during the association phase were fitted in a one-phase exponential association model.

Techniques: Concentration Assay, Binding Assay

Binding of FVIII light chain variants to full-length LRP1. A, association and dissociation of FVIII light chain variants to full-length LRP1 were assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB). LRP1 (Biomac) was coupled directly on a CM5 chip according to the manufacturer's instructions at three different densities (15, 18, and 21 fmol/mm−2). FVIII light chain variants (1–25 μg/ml based on Bradford analysis) were passed over the immobilized LRP1 in a buffer containing 150 mm NaCl, 5 mm CaCl2, 0.005% (v/v) Tween 20, and 20 mm Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of FVIII using the same buffer containing 1 m NaCl. Binding to LRP1 was corrected for binding in the absence of LRP1. Shown are the SPR curves for the channel on which 21 fmol/mm−2 LRP1 was coupled. B, The response units at time point 235 s were plotted as a function of the concentration for all three LRP1 surface densities.

Journal: The Journal of Biological Chemistry

Article Title: Factor VIII Interacts with the Endocytic Receptor Low-density Lipoprotein Receptor-related Protein 1 via an Extended Surface Comprising “Hot-Spot” Lysine Residues ^♦

doi: 10.1074/jbc.M115.650911

Figure Lengend Snippet: Binding of FVIII light chain variants to full-length LRP1. A, association and dissociation of FVIII light chain variants to full-length LRP1 were assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB). LRP1 (Biomac) was coupled directly on a CM5 chip according to the manufacturer's instructions at three different densities (15, 18, and 21 fmol/mm−2). FVIII light chain variants (1–25 μg/ml based on Bradford analysis) were passed over the immobilized LRP1 in a buffer containing 150 mm NaCl, 5 mm CaCl2, 0.005% (v/v) Tween 20, and 20 mm Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of FVIII using the same buffer containing 1 m NaCl. Binding to LRP1 was corrected for binding in the absence of LRP1. Shown are the SPR curves for the channel on which 21 fmol/mm−2 LRP1 was coupled. B, The response units at time point 235 s were plotted as a function of the concentration for all three LRP1 surface densities.

Techniques: Binding Assay, Concentration Assay

Binding of FVIIIdB variants to LRP1 cluster II. A, association and dissociation of LRP1 cluster II to FVIIIdB variants were assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB). The anti-C2 antibody CLB-EL14 IgG4 (39 fmol/mm−2 for FVIIIdB variants) was immobilized onto a CM5 sensor chip using the amine coupling method according to the manufacturer's instructions. Subsequently, FVIIIdB variants were bound to the anti-C2 antibody at a density of 9 fmol/mm−2. LRP1 cluster II (0–200 nm) was passed over the FVIIIdB variants in a buffer containing 150 mm NaCl, 5 mm CaCl2, 0.005% (v/v) Tween 20, and 20 mm Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of LRP1 cluster II using the same buffer containing 1 m NaCl. Binding to FVIIIdB variants was corrected for binding in the absence of FVIII. Binding data during the association phase were fitted in a one-phase exponential association model. B, the responses at equilibrium were fitted by non-linear regression using a standard hyperbola to generate KD values (GraphPad Prism 4 software). Error bars indicate ± S.D.

Journal: The Journal of Biological Chemistry

Article Title: Factor VIII Interacts with the Endocytic Receptor Low-density Lipoprotein Receptor-related Protein 1 via an Extended Surface Comprising “Hot-Spot” Lysine Residues ^♦

doi: 10.1074/jbc.M115.650911

Figure Lengend Snippet: Binding of FVIIIdB variants to LRP1 cluster II. A, association and dissociation of LRP1 cluster II to FVIIIdB variants were assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB). The anti-C2 antibody CLB-EL14 IgG4 (39 fmol/mm−2 for FVIIIdB variants) was immobilized onto a CM5 sensor chip using the amine coupling method according to the manufacturer's instructions. Subsequently, FVIIIdB variants were bound to the anti-C2 antibody at a density of 9 fmol/mm−2. LRP1 cluster II (0–200 nm) was passed over the FVIIIdB variants in a buffer containing 150 mm NaCl, 5 mm CaCl2, 0.005% (v/v) Tween 20, and 20 mm Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of LRP1 cluster II using the same buffer containing 1 m NaCl. Binding to FVIIIdB variants was corrected for binding in the absence of FVIII. Binding data during the association phase were fitted in a one-phase exponential association model. B, the responses at equilibrium were fitted by non-linear regression using a standard hyperbola to generate KD values (GraphPad Prism 4 software). Error bars indicate ± S.D.

Techniques: Binding Assay, Concentration Assay, Software

Binding of FVIIIdB variants to full-length LRP1. A, association and dissociation of FVIIIdB variants to full-length LRP1 were assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB). LRP1 (Biomac) was coupled directly on a CM5 chip according to the manufacturer's instructions at three different densities (15, 18, and 21 fmol/mm−2). FVIIIdB variants (5–1000 units/ml based on chromogenic activity) were passed over the immobilized LRP1 in a buffer containing 150 mm NaCl, 5 mm CaCl2, 0.005% (v/v) Tween 20, and 20 mm Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of FVIII using the same buffer containing 1 m NaCl. Binding to LRP1 was corrected for binding in the absence of LRP1. Shown are the SPR curves for the channel on which 21 fmol/mm−2 LRP1 was coupled. B, the response units at time point 235 s were plotted as a function of the concentration for all three LRP1 surface densities.

Journal: The Journal of Biological Chemistry

Article Title: Factor VIII Interacts with the Endocytic Receptor Low-density Lipoprotein Receptor-related Protein 1 via an Extended Surface Comprising “Hot-Spot” Lysine Residues ^♦

doi: 10.1074/jbc.M115.650911

Figure Lengend Snippet: Binding of FVIIIdB variants to full-length LRP1. A, association and dissociation of FVIIIdB variants to full-length LRP1 were assessed by SPR analysis employing a BIAcore 3000 biosensor (Biacore AB). LRP1 (Biomac) was coupled directly on a CM5 chip according to the manufacturer's instructions at three different densities (15, 18, and 21 fmol/mm−2). FVIIIdB variants (5–1000 units/ml based on chromogenic activity) were passed over the immobilized LRP1 in a buffer containing 150 mm NaCl, 5 mm CaCl2, 0.005% (v/v) Tween 20, and 20 mm Hepes (pH 7.4) at 25 °C with a flow rate of 20 μl/min. The sensor chip surface was regenerated three times after each concentration of FVIII using the same buffer containing 1 m NaCl. Binding to LRP1 was corrected for binding in the absence of LRP1. Shown are the SPR curves for the channel on which 21 fmol/mm−2 LRP1 was coupled. B, the response units at time point 235 s were plotted as a function of the concentration for all three LRP1 surface densities.

Techniques: Binding Assay, Activity Assay, Concentration Assay

Review

bio rad s proteon xpr36 array biosensor (Bio-Rad)

Structured Review

Images

Related Articles

other:

SPR Assay:

Binding Assay:

Similar Products

Image Search Results