Review




Structured Review

Scientifica patch clamp micromanipulator
Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a <t>micromanipulator.</t> The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Patch Clamp Micromanipulator, supplied by Scientifica, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/patchstar+micromanipulator/5+clamp+clampex10+custom+patch+rig+running+scientifica/pmc12602122-159-0-3
Average 86 stars, based on 1 article reviews
patch clamp micromanipulator - by Bioz Stars, 2026-11
86/100 stars

Images

1) Product Images from "Optogenetic Approach for Investigating Descending Control of Nociception in Ex Vivo Spinal Cord Preparation"

Article Title: Optogenetic Approach for Investigating Descending Control of Nociception in Ex Vivo Spinal Cord Preparation

Journal: Bio-protocol

doi: 10.21769/BioProtoc.5483

Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a micromanipulator. The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].
Figure Legend Snippet: Left: Overview of the experimental setup showing perfusion inflow and outflow tubing, a low-magnification objective, a high-magnification water-immersion objective, and both white and infrared (IR)-LEDs mounted on a micromanipulator. The LEDs should be connected to an adjusted power supply unit and positioned so that their beams strike the plane of the experimental chamber at a 10–20° angle. Note that the LEDs must remain above the bath solution and should not be submerged. Right: Overview of spinal cord preparation in the experimental chamber. The ex vivo spinal cord preparation is affixed to a metal plate at an approximately 45° angle so that the dorsal horn is on top. The spared dorsal root is connected to a suction electrode and is slightly pulled to reveal the underlying dorsal horn. Modified from [17].

Techniques Used: Ex Vivo, Modification

Related Articles

Patch Clamp:

Article Title: Orphan lysosomal solute carrier MFSD1 facilitates highly selective dipeptide transport.
Article Snippet: Experiments were conducted at 15 °C or 25 °C, as indicated, with precise temperature control provided by a temperature control unit (cell microcontrol inline preheater, Green Leaf Scientific), which was linked to a temperature control system (PTC- 20, npi electronic GmbH, Tamm, Germany). .. Both, the patch- clamp pipette, and the perfusion system were manipulated using the PatchStar micromanipulator (Scientifica Ltd., Uckfield, East Sussex, United Kingdom). ..

Article Title: Developmental trajectories predict dendritic remodeling after injury
Article Snippet: Patch-Clamp microscope , Scientifica , Slice Scope. .. Patch-Clamp manipulator , Scientifica , Serial# 301311. .. Zeiss LSM 710 confocal microscope , Zeiss , Cat# LSM710.

Article Title: Integration of autopatching with automated pipette and cell detection in vitro.
Article Snippet: Image guidance is accomplished by interfacing with a charge-coupled device (CCD) camera (QImaging). .. The Autopatcher IG relies on motorized three-axis control of the microscope stage and the patch-clamp pipette micromanipulator (Scientifica SliceScope Pro 1,000; Scientifica). ..

Article Title: Optogenetic Approach for Investigating Descending Control of Nociception in Ex Vivo Spinal Cord Preparation
Article Snippet: .. Patch clamp micromanipulator (Scientifica, model: PatchStar) 5. .. Constant current stimulator (A.M.P.I., model: ISO-FLEX) 6.

Article Title: Astrocyte CCN1 stabilizes neural circuits in the adult brain.
Article Snippet: Acquisition of in vivo calcium imaging data was done using a custom Neurolabware scope running MATLAB 2022b and the latest version of Scanbox. .. Electrophysiology data were acquired using a custom Scientifica patch-clamp rig running Clampex10.5. ..

Transferring:

Article Title: Orphan lysosomal solute carrier MFSD1 facilitates highly selective dipeptide transport.
Article Snippet: Experiments were conducted at 15 °C or 25 °C, as indicated, with precise temperature control provided by a temperature control unit (cell microcontrol inline preheater, Green Leaf Scientific), which was linked to a temperature control system (PTC- 20, npi electronic GmbH, Tamm, Germany). .. Both, the patch- clamp pipette, and the perfusion system were manipulated using the PatchStar micromanipulator (Scientifica Ltd., Uckfield, East Sussex, United Kingdom). ..

Article Title: Integration of autopatching with automated pipette and cell detection in vitro.
Article Snippet: Image guidance is accomplished by interfacing with a charge-coupled device (CCD) camera (QImaging). .. The Autopatcher IG relies on motorized three-axis control of the microscope stage and the patch-clamp pipette micromanipulator (Scientifica SliceScope Pro 1,000; Scientifica). ..

Control:

Article Title: Integration of autopatching with automated pipette and cell detection in vitro.
Article Snippet: Image guidance is accomplished by interfacing with a charge-coupled device (CCD) camera (QImaging). .. The Autopatcher IG relies on motorized three-axis control of the microscope stage and the patch-clamp pipette micromanipulator (Scientifica SliceScope Pro 1,000; Scientifica). ..

Microscopy:

Article Title: Integration of autopatching with automated pipette and cell detection in vitro.
Article Snippet: Image guidance is accomplished by interfacing with a charge-coupled device (CCD) camera (QImaging). .. The Autopatcher IG relies on motorized three-axis control of the microscope stage and the patch-clamp pipette micromanipulator (Scientifica SliceScope Pro 1,000; Scientifica). ..



Similar Products

86
Scientifica patchstar motorized micromanipulator
Patchstar Motorized Micromanipulator, supplied by Scientifica, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/patchstar+micromanipulator/micromanipulator/bio_rxiv__64898__2026__04__21__719977-176-12-15
Average 86 stars, based on 1 article reviews
patchstar motorized micromanipulator - by Bioz Stars, 2026-11
86/100 stars
  Buy from Supplier

86
Scientifica patchstar micromanipulator
Patchstar Micromanipulator, supplied by Scientifica, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/patchstar+micromanipulator/micromanipulator/pm41642708-386-18-20
Average 86 stars, based on 1 article reviews
patchstar micromanipulator - by Bioz Stars, 2026-11
86/100 stars
  Buy from Supplier

Image Search Results