Modification:Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: .. Electrophysiology Materials Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) Construction of the Recording Apparatus list-behavior=enumerated prefix-word= mark-type=decimal max-label-size=0 Attach your materials to the vibration isolation table in appropriate positions relative to the treadmill using the Thorlabs posts and RA90 right-angle connectors. ..
Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: .. Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) .. list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel
Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: .. Materials Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) Construction of the Recording Apparatus list-behavior=enumerated prefix-word= mark-type=decimal max-label-size=0 Attach your materials to the vibration isolation table in appropriate positions relative to the treadmill using the Thorlabs posts and RA90 right-angle connectors. ..
Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) .. list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel .. list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made)
Microscopy:Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: .. Electrophysiology Materials Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) Construction of the Recording Apparatus list-behavior=enumerated prefix-word= mark-type=decimal max-label-size=0 Attach your materials to the vibration isolation table in appropriate positions relative to the treadmill using the Thorlabs posts and RA90 right-angle connectors. ..
Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: .. Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) .. list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel
Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: .. Materials Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) Construction of the Recording Apparatus list-behavior=enumerated prefix-word= mark-type=decimal max-label-size=0 Attach your materials to the vibration isolation table in appropriate positions relative to the treadmill using the Thorlabs posts and RA90 right-angle connectors. ..
Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) .. list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel .. list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made)
Sterility:Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: .. Electrophysiology Materials Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) Construction of the Recording Apparatus list-behavior=enumerated prefix-word= mark-type=decimal max-label-size=0 Attach your materials to the vibration isolation table in appropriate positions relative to the treadmill using the Thorlabs posts and RA90 right-angle connectors. ..
Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: .. Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) .. list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel
Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: .. Materials Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) Construction of the Recording Apparatus list-behavior=enumerated prefix-word= mark-type=decimal max-label-size=0 Attach your materials to the vibration isolation table in appropriate positions relative to the treadmill using the Thorlabs posts and RA90 right-angle connectors. ..
Saline:Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: .. Electrophysiology Materials Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) Construction of the Recording Apparatus list-behavior=enumerated prefix-word= mark-type=decimal max-label-size=0 Attach your materials to the vibration isolation table in appropriate positions relative to the treadmill using the Thorlabs posts and RA90 right-angle connectors. ..
Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: .. Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) .. list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel
Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: .. Materials Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) Construction of the Recording Apparatus list-behavior=enumerated prefix-word= mark-type=decimal max-label-size=0 Attach your materials to the vibration isolation table in appropriate positions relative to the treadmill using the Thorlabs posts and RA90 right-angle connectors. ..
Isolation:Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: .. Electrophysiology Materials Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) Construction of the Recording Apparatus list-behavior=enumerated prefix-word= mark-type=decimal max-label-size=0 Attach your materials to the vibration isolation table in appropriate positions relative to the treadmill using the Thorlabs posts and RA90 right-angle connectors. ..
Article Title: Single-Unit Extracellular Recording from the Cerebellum During Eyeblink Conditioning in Head-Fixed Mice
Article Snippet: .. Materials Apparatus list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Stereotaxic micromanipulator (e.g., Narishige SMM-100 with custom shaft (EDMS16–054b) and modified MA-2 micromanipulator stand (SDMS16–033a)) ( ) One-axis micromanipulator (e.g., Narishige MMO-220A one-axis oil hydraulic micromanipulator modified to remove the ball joint) ( ) Handheld microscope camera (Dino-Lite AD-4013 MTL) ( ) Adapter for microscope camera (Dino-Lite HD-P1) Three-axis manipulator for microscope camera (e.g. Narishige UMC3) ( ) 10 mm OD post (if you use the UMC3) 7 mm OD post (for holding the camera adapter in the micromanipulator) Four 1⁄2” diameter 12” posts (Thorlabs) Two 1⁄2” diameter 6” posts (Thorlabs) Three right-angle mounts for 1⁄2” posts (Thorlabs RA90) 1/stimulus, third hand (e.g. alligator clip and stem from SUNYEE Helping Hand MZ101B) 1/stimulus, right-angle mounts that can accommodate the third hands (OptoSigma CCHN-12.7–6 is compatible with SUNYEE Helping Hand) Solid core copper ground wires and panel Supplies list-behavior=unordered prefix-word= mark-type=disc max-label-size=0 Custom dura scraper (see , ) Sterile saline Small cotton balls 7.5% povidone-iodine Electrodes (see Note 6 ) Optrodes (see below for construction instructions) Implantable optical fibers (e.g., Thorlabs or custom-made) Construction of the Recording Apparatus list-behavior=enumerated prefix-word= mark-type=decimal max-label-size=0 Attach your materials to the vibration isolation table in appropriate positions relative to the treadmill using the Thorlabs posts and RA90 right-angle connectors. ..
|
