Review



multiphysics deformation model  (COMSOL Inc)

 
  • Logo
  • About
  • News
  • Press Release
  • Team
  • Advisors
  • Partners
  • Contact
  • Bioz Stars
  • Bioz vStars
    • 90
      Buy from Supplier

    Structured Review

    COMSOL Inc multiphysics deformation model
    Results of the COMSOL <t>Multiphysics</t> deformation model simulating the effects of the observed roof subsidence on the east side of the Rílutungnahamrar–Fálkahnaus conduit. ( a ) X–Z cross section. Subsidence is localized to a zone close to the dyke. Black lines indicate the tilt of previously horizontal lines (i.e. lava layers). ( b ) Subsidence of the pluton roof at the pluton roof interface. The black box marks the zone which was forced to subside. The dyke is located at the left edge of the black box. ( c ) Subsidence observed at the Earth’s surface (i.e. 1.75 km above the pluton roof). The black box indicates the pluton extents in the model.
    Multiphysics Deformation Model, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/comsol+multiphysics+modelling/multiphysics+deformation+model/pmc10781678-216-6-5
    Average 90 stars, based on 1 article reviews
    multiphysics deformation model - by Bioz Stars, 2026-10
    90/100 stars

    Images

    1) Product Images from "Volcanic unrest as seen from the magmatic source: Reyðarártindur pluton, Iceland"

    Article Title: Volcanic unrest as seen from the magmatic source: Reyðarártindur pluton, Iceland

    Journal: Scientific Reports

    doi: 10.1038/s41598-023-50880-0

    Results of the COMSOL Multiphysics deformation model simulating the effects of the observed roof subsidence on the east side of the Rílutungnahamrar–Fálkahnaus conduit. ( a ) X–Z cross section. Subsidence is localized to a zone close to the dyke. Black lines indicate the tilt of previously horizontal lines (i.e. lava layers). ( b ) Subsidence of the pluton roof at the pluton roof interface. The black box marks the zone which was forced to subside. The dyke is located at the left edge of the black box. ( c ) Subsidence observed at the Earth’s surface (i.e. 1.75 km above the pluton roof). The black box indicates the pluton extents in the model.
    Figure Legend Snippet: Results of the COMSOL Multiphysics deformation model simulating the effects of the observed roof subsidence on the east side of the Rílutungnahamrar–Fálkahnaus conduit. ( a ) X–Z cross section. Subsidence is localized to a zone close to the dyke. Black lines indicate the tilt of previously horizontal lines (i.e. lava layers). ( b ) Subsidence of the pluton roof at the pluton roof interface. The black box marks the zone which was forced to subside. The dyke is located at the left edge of the black box. ( c ) Subsidence observed at the Earth’s surface (i.e. 1.75 km above the pluton roof). The black box indicates the pluton extents in the model.

    Techniques Used:

    Related Articles

    other:

    Article Title: Volcanic unrest as seen from the magmatic source: Reyðarártindur pluton, Iceland.
    Article Snippet: Results of the COMSOL Multiphysics deformation model simulating the effects of the observed roof subsidence on the east side of the Rílutungnahamrar–Fálkahnaus conduit. (a) X–Z cross section.

    Article Title: Volcanic unrest as seen from the magmatic source: Reyðarártindur pluton, Iceland
    Article Snippet: Figure 8 Results of the COMSOL Multiphysics deformation model simulating the effects of the observed roof subsidence on the east side of the Rílutungnahamrar–Fálkahnaus conduit. ( a ) X–Z cross section.

    Article Title: Volcanic unrest as seen from the magmatic source– Reyðarártindur pluton, Iceland
    Article Snippet: Page 25/26 Results of the COMSOL Multiphysics deformation model simulating the roof subsidence to the east of the Rílutungnahamrar-Fálkahnaus conduit. (a) X–Z cross section.



    Similar Products

    comsol multiphysics-predicted model  (COMSOL Inc)
    90
    COMSOL Inc comsol multiphysics-predicted model
    Comsol Multiphysics Predicted Model, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/comsol+multiphysics+modelling/comsol+multiphysics+model/pmc12212249-327-8-8
    Average 90 stars, based on 1 article reviews
    comsol multiphysics-predicted model - by Bioz Stars, 2026-10
    90/100 stars
    		  Buy from Supplier
    multiphysics comsol modelling  (COMSOL Inc)
    90
    COMSOL Inc multiphysics comsol modelling
    Multiphysics Comsol Modelling, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/comsol+multiphysics+modelling/comsol+multiphysics+model/pmc12274617-120-8-11
    Average 90 stars, based on 1 article reviews
    multiphysics comsol modelling - by Bioz Stars, 2026-10
    90/100 stars
    		  Buy from Supplier
    finite element model (fem) using the solid mechanics module of comsol multiphysics version 5.3a software  (COMSOL Inc)
    90
    COMSOL Inc finite element model (fem) using the solid mechanics module of comsol multiphysics version 5.3a software
    Finite Element Model (Fem) Using The Solid Mechanics Module Of Comsol Multiphysics Version 5.3a Software, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/comsol+multiphysics+modelling/comsol+multiphysics/pm40659755-404-43-39
    Average 90 stars, based on 1 article reviews
    finite element model (fem) using the solid mechanics module of comsol multiphysics version 5.3a software - by Bioz Stars, 2026-10
    90/100 stars
    		  Buy from Supplier
    finite-element analytical model comsol multiphysics  (COMSOL Inc)
    90
    COMSOL Inc finite-element analytical model comsol multiphysics
    Finite Element Analytical Model Comsol Multiphysics, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/comsol+multiphysics+modelling/comsol+multiphysics+model/pmc11287284__pnas__2404164121__sapp-43-3-6
    Average 90 stars, based on 1 article reviews
    finite-element analytical model comsol multiphysics - by Bioz Stars, 2026-10
    90/100 stars
    		  Buy from Supplier
    simulation model comsol multiphysics 6.1  (COMSOL Inc)
    90
    COMSOL Inc simulation model comsol multiphysics 6.1
    Simulation Model Comsol Multiphysics 6.1, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/comsol+multiphysics+modelling/comsol+multiphysics/pm40645934-205-14-14
    Average 90 stars, based on 1 article reviews
    simulation model comsol multiphysics 6.1 - by Bioz Stars, 2026-10
    90/100 stars
    		  Buy from Supplier
    comsol multiphysics model  (COMSOL Inc)
    90
    COMSOL Inc comsol multiphysics model
    (a) The output power measured experimentally for TEC cells with different electrode separation ( i.e. electrolyte or hydrogel thickness) as a function of voltage. (b) V oc and current density calculated with a complete COMSOL <t>multiphysics</t> simulation as a function of electrode separation. (c) The experimental result for the maximum output power as a function of electrode separation along with a 3rd-order polynomial fit just to underline the trend. (d) The convection velocity at the electrode/electrolyte interface obtained for cells with 10 mm width and different heights, explaining the reason for the performance decay after 20 mm (obtained from simulations).
    Comsol Multiphysics Model, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/comsol+multiphysics+modelling/comsol+multiphysics+model/pmc12219540-89-2-3
    Average 90 stars, based on 1 article reviews
    comsol multiphysics model - by Bioz Stars, 2026-10
    90/100 stars
    		  Buy from Supplier
    numerical model comsol multiphysics  (COMSOL Inc)
    90
    COMSOL Inc numerical model comsol multiphysics
    (a) The output power measured experimentally for TEC cells with different electrode separation ( i.e. electrolyte or hydrogel thickness) as a function of voltage. (b) V oc and current density calculated with a complete COMSOL <t>multiphysics</t> simulation as a function of electrode separation. (c) The experimental result for the maximum output power as a function of electrode separation along with a 3rd-order polynomial fit just to underline the trend. (d) The convection velocity at the electrode/electrolyte interface obtained for cells with 10 mm width and different heights, explaining the reason for the performance decay after 20 mm (obtained from simulations).
    Numerical Model Comsol Multiphysics, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/comsol+multiphysics+modelling/comsol+multiphysics+model/pm40603437-191-11-14
    Average 90 stars, based on 1 article reviews
    numerical model comsol multiphysics - by Bioz Stars, 2026-10
    90/100 stars
    		  Buy from Supplier

    Image Search Results


    (a) The output power measured experimentally for TEC cells with different electrode separation ( i.e. electrolyte or hydrogel thickness) as a function of voltage. (b) V oc and current density calculated with a complete COMSOL multiphysics simulation as a function of electrode separation. (c) The experimental result for the maximum output power as a function of electrode separation along with a 3rd-order polynomial fit just to underline the trend. (d) The convection velocity at the electrode/electrolyte interface obtained for cells with 10 mm width and different heights, explaining the reason for the performance decay after 20 mm (obtained from simulations).

    Journal: Materials Horizons

    Article Title: Hydrogel-based thermoelectrochemical cells for waste heat recovery under passive cooling conditions †

    doi: 10.1039/d5mh00771b

    Figure Lengend Snippet: (a) The output power measured experimentally for TEC cells with different electrode separation ( i.e. electrolyte or hydrogel thickness) as a function of voltage. (b) V oc and current density calculated with a complete COMSOL multiphysics simulation as a function of electrode separation. (c) The experimental result for the maximum output power as a function of electrode separation along with a 3rd-order polynomial fit just to underline the trend. (d) The convection velocity at the electrode/electrolyte interface obtained for cells with 10 mm width and different heights, explaining the reason for the performance decay after 20 mm (obtained from simulations).

    Article Snippet: Using a comprehensive COMSOL Multiphysics model (Fig. S3 with parameters reported in Table S1, ESI ), we compare the thermal behavior of a conventional liquid electrolyte and a hydrogel-based electrolyte as a function of the electrode separations, while keeping the lateral dimensions of the cell constant (width W = 10 mm and depth D = 10 mm).

    Techniques: Convection