Review




Structured Review

RegenHU Ltd 3d discovery printer
Standardization of bioink on rheology, printability, cross-linking, and bioprinting of neural tissue constructs. (A) 10% tunicate hydrogel in NSC media is extruded into PBS, and the filament is not dense enough to free flow into the solution, as shown by its upward push when it extrudes into the solution. The filaments broke and fell into the solution when extruded continuously. (B) 10% tunicate gel + 26% Matrigel in NSC media in PBS, the filament is smoothly flowing into the solution. The filaments broke and fell into the solution when extruded continuously for a longer time. (C) 10% tunicate gel in NSC media extruded into the crosslinking solution (250 mM CaCl 2 ) gets cross-linked but lack smooth flow. (D) 10% tunicate gel + 26% Matrigel in NSC media extruded into the cross-linking solution (250 mM CaCl 2 ) shows a seamless extrusion. (E) Filament formation of 10% tunicate hydrogel in NSC media without Matrigel. (F) Filament formation of 10% tunicate gel + 26% Matrigel in NSC media. (G) Droplet formation of 10% tunicate hydrogel in NSC media without Matrigel at the tip of the needle. (H) Droplet formation of 10% tunicate gel +26% Matrigel in NSC media at the tip of the needle. (I) <t>BioCAD</t> design of the tissue construct. (J) Tool path generated using the BioCAD software showing the direction of print head movement. The numbers represent the steps in print head movement. (K) The shear modulus of the hydrogel. (L) Lattice coordinate profile showing structural uniformity of the two layered structure. The upward wave shows the mean struct length and the downward wave shows the total strut thickness. (M) <t>3D</t> printed lattices in layers ranging from 1 to 10, showing the printability of the hydrogel. (N) Bioprinted tissue constructs in a 24-well plate printed using the well editor software plugin. The dimensions of the bioprinted tissue constructs were 8 mm × 8 mm × 1 mm. Alcian blue dye was used to enhance the visibility of cell-free hydrogel filaments. Neural tissue constructs were printed without the dye.
3d Discovery Printer, supplied by RegenHU Ltd, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+printer+preform+software/3d+discovery+bioprinter/pmc09668579-93-7-12
Average 90 stars, based on 1 article reviews
3d discovery printer - by Bioz Stars, 2026-11
90/100 stars

Images

1) Product Images from "Bioprinting of Human Neural Tissues Using a Sustainable Marine Tunicate-Derived Bioink for Translational Medicine Applications"

Article Title: Bioprinting of Human Neural Tissues Using a Sustainable Marine Tunicate-Derived Bioink for Translational Medicine Applications

Journal: International Journal of Bioprinting

doi: 10.18063/ijb.v8i4.604

Standardization of bioink on rheology, printability, cross-linking, and bioprinting of neural tissue constructs. (A) 10% tunicate hydrogel in NSC media is extruded into PBS, and the filament is not dense enough to free flow into the solution, as shown by its upward push when it extrudes into the solution. The filaments broke and fell into the solution when extruded continuously. (B) 10% tunicate gel + 26% Matrigel in NSC media in PBS, the filament is smoothly flowing into the solution. The filaments broke and fell into the solution when extruded continuously for a longer time. (C) 10% tunicate gel in NSC media extruded into the crosslinking solution (250 mM CaCl 2 ) gets cross-linked but lack smooth flow. (D) 10% tunicate gel + 26% Matrigel in NSC media extruded into the cross-linking solution (250 mM CaCl 2 ) shows a seamless extrusion. (E) Filament formation of 10% tunicate hydrogel in NSC media without Matrigel. (F) Filament formation of 10% tunicate gel + 26% Matrigel in NSC media. (G) Droplet formation of 10% tunicate hydrogel in NSC media without Matrigel at the tip of the needle. (H) Droplet formation of 10% tunicate gel +26% Matrigel in NSC media at the tip of the needle. (I) BioCAD design of the tissue construct. (J) Tool path generated using the BioCAD software showing the direction of print head movement. The numbers represent the steps in print head movement. (K) The shear modulus of the hydrogel. (L) Lattice coordinate profile showing structural uniformity of the two layered structure. The upward wave shows the mean struct length and the downward wave shows the total strut thickness. (M) 3D printed lattices in layers ranging from 1 to 10, showing the printability of the hydrogel. (N) Bioprinted tissue constructs in a 24-well plate printed using the well editor software plugin. The dimensions of the bioprinted tissue constructs were 8 mm × 8 mm × 1 mm. Alcian blue dye was used to enhance the visibility of cell-free hydrogel filaments. Neural tissue constructs were printed without the dye.
Figure Legend Snippet: Standardization of bioink on rheology, printability, cross-linking, and bioprinting of neural tissue constructs. (A) 10% tunicate hydrogel in NSC media is extruded into PBS, and the filament is not dense enough to free flow into the solution, as shown by its upward push when it extrudes into the solution. The filaments broke and fell into the solution when extruded continuously. (B) 10% tunicate gel + 26% Matrigel in NSC media in PBS, the filament is smoothly flowing into the solution. The filaments broke and fell into the solution when extruded continuously for a longer time. (C) 10% tunicate gel in NSC media extruded into the crosslinking solution (250 mM CaCl 2 ) gets cross-linked but lack smooth flow. (D) 10% tunicate gel + 26% Matrigel in NSC media extruded into the cross-linking solution (250 mM CaCl 2 ) shows a seamless extrusion. (E) Filament formation of 10% tunicate hydrogel in NSC media without Matrigel. (F) Filament formation of 10% tunicate gel + 26% Matrigel in NSC media. (G) Droplet formation of 10% tunicate hydrogel in NSC media without Matrigel at the tip of the needle. (H) Droplet formation of 10% tunicate gel +26% Matrigel in NSC media at the tip of the needle. (I) BioCAD design of the tissue construct. (J) Tool path generated using the BioCAD software showing the direction of print head movement. The numbers represent the steps in print head movement. (K) The shear modulus of the hydrogel. (L) Lattice coordinate profile showing structural uniformity of the two layered structure. The upward wave shows the mean struct length and the downward wave shows the total strut thickness. (M) 3D printed lattices in layers ranging from 1 to 10, showing the printability of the hydrogel. (N) Bioprinted tissue constructs in a 24-well plate printed using the well editor software plugin. The dimensions of the bioprinted tissue constructs were 8 mm × 8 mm × 1 mm. Alcian blue dye was used to enhance the visibility of cell-free hydrogel filaments. Neural tissue constructs were printed without the dye.

Techniques Used: Construct, Generated, Software, Shear

Related Articles

Software:

Article Title: Effect of Tyrosine-Containing Self-Assembling β-Sheet Peptides on Macrophage Polarization and Inflammatory Response.
Article Snippet: .. One mL of bath per well was deposited into 24- well plates and degassed using an Eppendorf centrifuge at 500g for 5 min. Freeform 3D printing was then performed using a 3D Discovery Printer and BioCAD software (version 1.1−12) from RegenHu Ltd. (Villaz-St-Pierre, Switzerland) using a 20G needle with PTFE-with 0.61 mm (Nordson EFD, Westlake). ..

Article Title: Effect of Tyrosine-Containing Self-Assembling β-Sheet Peptides on Macrophage Polarization and Inflammatory Response
Article Snippet: .. One mL of bath per well was deposited into 24-well plates and degassed using an Eppendorf centrifuge at 500 g for 5 min. Freeform 3D printing was then performed using a 3D Discovery Printer and BioCAD software (version 1.1–12) from RegenHu Ltd. (Villaz-St-Pierre, Switzerland) using a 20G needle with PTFE-with 0.61 mm (Nordson EFD, Westlake). ..

other:

Article Title: Enhanced gelatin methacryloyl nanohydroxyapatite hydrogel for high-fidelity 3D printing of bone tissue engineering scaffolds.
Article Snippet: Accepted Manuscript is “the version of the article accepted for publication including all changes made as a result of the peer review process, and which may also include the addition to the article by IOP Publishing of a header, an article ID, a cover sheet and/or an ‘Accepted Manuscript’ watermark, but excluding any other editing, typesetting or other changes made by IOP Publishing and/or its licensors” This Accepted Manuscript is © 2025 The Author(s).. Published by IOP Publishing Ltd.

Article Title: Characterisation and parametric optimisation of L-PBF and DIW of WC-12wt%Co/Mo cemented carbides using response surface methodology
Article Snippet: A RegenHU 3D-Discovery printer was used to fabricate green compacts by DIW.

Article Title: Printing β-TCP-laden GelMA/Alginate Interpenetrating-Polymer-Network Biomaterial Inks for Bone Tissue Engineering
Article Snippet: Bone’s capacity for self-repair is limited when large defects arise from trauma or infection.. Traditional grafting methods like autografts and allografts often face challenges like immune rejection and limited availability.. Traditional scaffold manufacturing techniques for bone tissue engineering frequently lack precise control over the constructs’ material composition and pore architecture.

Article Title: Suspension bioprinted whole intervertebral disc analogues enable regional stiffness- and hypoxia-regulated matrix secretion by primary human nucleus pulposus and annulus fibrosus cells.
Article Snippet: A 3DDiscovery Evolution bioprinter (RegenHU, 3DD-G01) was fitted with two cell-friendly microvalve-assisted material jetting printheads (CF-300N/H) and equipped with bioprinting cartridges (C-05CC-T) connected via pressure adapters (CAH-05CC) and luer-locks (LUER-AD-T).

Article Title: `Radical-free photopolymerizable composites of hyaluronic acid and gelatin for tissue engineering.
Article Snippet: Photopolymerization is widely used in tissue engineering and biofabrication to pattern specific geometries and modulate physical properties.. Commonly employed photochemistries rely on a photoinitiator that generates reactive free radicals when exposed to light, which can lead to cytotoxic effects due to interactions with biomolecules and cellular components.. To mitigate these issues, we have developed hyaluronic acid and gelatin derivatives of umbelliferone, which can form dimers thanks to cyclobutene ring formation when exposed to long-wavelength UV light (365 nm).

Electrospinning:

Article Title: Bone mimetic environments support engineering, propagation, and analysis of therapeutic response of patient-derived cells, ex vivo and in vivo
Article Snippet: Medical grade polycaprolactone (PCL; 43 kDa, Polysciences; Warrington, PA) scaffolds were fabricated as previously described [ 31 ]. .. Scaffolds were printed by melt electrospinning writing using a 3DDiscovery Evolution printer, RegenHU, Switzerland. ..



Similar Products

90
Formlabs Inc preform 3d printer software
Preform 3d Printer Software, supplied by Formlabs Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+printer+preform+software/3d+printing+software+preform/10__1080_slash_17452759__2025__2512977-143-6-9
Average 90 stars, based on 1 article reviews
preform 3d printer software - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Formlabs Inc 3d printer slicer software program preform software
3d Printer Slicer Software Program Preform Software, supplied by Formlabs Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+printer+preform+software/3d+printing+software+preform/pmc11508738-65-7-14
Average 90 stars, based on 1 article reviews
3d printer slicer software program preform software - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Formlabs Inc 3d printer software preform 3.27.0
3d Printer Software Preform 3.27.0, supplied by Formlabs Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+printer+preform+software/3d+printing+software+preform/pmc11433717-63-8-13
Average 90 stars, based on 1 article reviews
3d printer software preform 3.27.0 - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Formlabs Inc 3d printer preform software
3d Printer Preform Software, supplied by Formlabs Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+printer+preform+software/3d+printing+software+preform/pm38703935-51-11-15
Average 90 stars, based on 1 article reviews
3d printer preform software - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Formlabs Inc 3d printer software preform
<t>3D</t> printing process workflow. Both 3D anatomical models and surgical cutting guides in STL file format are imported to <t>PreForm</t> software. Resin type and layer thickness are selected, followed by orientation and support structure design processes. Once health checks are done, the 3D virtual pieces are 3D printed by an SLA printer—Formlabs 3B (1). Next, the pieces go through a washing machine (2), for 20 min, and a cure machine (3), for 60 min. After this post-processing, final products are obtained, and they can now be used for pre-surgical planning or be sterilized to be part of the surgery. Tools’ features are shown on the side of the workflow. Partial images courtesy and copyright of Formlabs Inc.
3d Printer Software Preform, supplied by Formlabs Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+printer+preform+software/3d+printing+software+preform/pmc10876850-85-9-13
Average 90 stars, based on 1 article reviews
3d printer software preform - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Formlabs Inc 3d-printer cam software preform 3.32.0
<t>3D</t> printing process workflow. Both 3D anatomical models and surgical cutting guides in STL file format are imported to <t>PreForm</t> software. Resin type and layer thickness are selected, followed by orientation and support structure design processes. Once health checks are done, the 3D virtual pieces are 3D printed by an SLA printer—Formlabs 3B (1). Next, the pieces go through a washing machine (2), for 20 min, and a cure machine (3), for 60 min. After this post-processing, final products are obtained, and they can now be used for pre-surgical planning or be sterilized to be part of the surgery. Tools’ features are shown on the side of the workflow. Partial images courtesy and copyright of Formlabs Inc.
3d Printer Cam Software Preform 3.32.0, supplied by Formlabs Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+printer+preform+software/3dprinter/pm37959559-87-16-22
Average 90 stars, based on 1 article reviews
3d-printer cam software preform 3.32.0 - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Formlabs Inc milling machine and 3d-printer cam software preform 3.32.0
<t>3D</t> printing process workflow. Both 3D anatomical models and surgical cutting guides in STL file format are imported to <t>PreForm</t> software. Resin type and layer thickness are selected, followed by orientation and support structure design processes. Once health checks are done, the 3D virtual pieces are 3D printed by an SLA printer—Formlabs 3B (1). Next, the pieces go through a washing machine (2), for 20 min, and a cure machine (3), for 60 min. After this post-processing, final products are obtained, and they can now be used for pre-surgical planning or be sterilized to be part of the surgery. Tools’ features are shown on the side of the workflow. Partial images courtesy and copyright of Formlabs Inc.
Milling Machine And 3d Printer Cam Software Preform 3.32.0, supplied by Formlabs Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+printer+preform+software/3dprinter/pmc10650727-67-11-19
Average 90 stars, based on 1 article reviews
milling machine and 3d-printer cam software preform 3.32.0 - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Formlabs Inc 3d printer software formlabs preform
<t>3D</t> printing process workflow. Both 3D anatomical models and surgical cutting guides in STL file format are imported to <t>PreForm</t> software. Resin type and layer thickness are selected, followed by orientation and support structure design processes. Once health checks are done, the 3D virtual pieces are 3D printed by an SLA printer—Formlabs 3B (1). Next, the pieces go through a washing machine (2), for 20 min, and a cure machine (3), for 60 min. After this post-processing, final products are obtained, and they can now be used for pre-surgical planning or be sterilized to be part of the surgery. Tools’ features are shown on the side of the workflow. Partial images courtesy and copyright of Formlabs Inc.
3d Printer Software Formlabs Preform, supplied by Formlabs Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+printer+preform+software/3d+printing+software+preform/pm36347751-155-7-10
Average 90 stars, based on 1 article reviews
3d printer software formlabs preform - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Formlabs Inc 3d printer software preform software v. 3.1.2
<t>3D</t> printing process workflow. Both 3D anatomical models and surgical cutting guides in STL file format are imported to <t>PreForm</t> software. Resin type and layer thickness are selected, followed by orientation and support structure design processes. Once health checks are done, the 3D virtual pieces are 3D printed by an SLA printer—Formlabs 3B (1). Next, the pieces go through a washing machine (2), for 20 min, and a cure machine (3), for 60 min. After this post-processing, final products are obtained, and they can now be used for pre-surgical planning or be sterilized to be part of the surgery. Tools’ features are shown on the side of the workflow. Partial images courtesy and copyright of Formlabs Inc.
3d Printer Software Preform Software V. 3.1.2, supplied by Formlabs Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+printer+preform+software/3d+printing+software+preform/pm34850065-60-12-19
Average 90 stars, based on 1 article reviews
3d printer software preform software v. 3.1.2 - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

Image Search Results


3D printing process workflow. Both 3D anatomical models and surgical cutting guides in STL file format are imported to PreForm software. Resin type and layer thickness are selected, followed by orientation and support structure design processes. Once health checks are done, the 3D virtual pieces are 3D printed by an SLA printer—Formlabs 3B (1). Next, the pieces go through a washing machine (2), for 20 min, and a cure machine (3), for 60 min. After this post-processing, final products are obtained, and they can now be used for pre-surgical planning or be sterilized to be part of the surgery. Tools’ features are shown on the side of the workflow. Partial images courtesy and copyright of Formlabs Inc.

Journal: Frontiers in Veterinary Science

Article Title: In-house three-dimensional printing for surgical planning: learning curve from a case series of temporomandibular joint and related disorders

doi: 10.3389/fvets.2024.1347107

Figure Lengend Snippet: 3D printing process workflow. Both 3D anatomical models and surgical cutting guides in STL file format are imported to PreForm software. Resin type and layer thickness are selected, followed by orientation and support structure design processes. Once health checks are done, the 3D virtual pieces are 3D printed by an SLA printer—Formlabs 3B (1). Next, the pieces go through a washing machine (2), for 20 min, and a cure machine (3), for 60 min. After this post-processing, final products are obtained, and they can now be used for pre-surgical planning or be sterilized to be part of the surgery. Tools’ features are shown on the side of the workflow. Partial images courtesy and copyright of Formlabs Inc.

Article Snippet: The previous obtained STL files were uploaded to the 3D printer software PreForm (Formlabs, United States) which automatically converted them to the printer’s directions.

Techniques: Software