Review



3d finite element simulation model  (Ansoft Corporation)

 
  • Logo
  • About
  • News
  • Press Release
  • Team
  • Advisors
  • Partners
  • Contact
  • Bioz Stars
  • Bioz vStars
    • 90
      Buy from Supplier

    Structured Review

    Ansoft Corporation 3d finite element simulation model
    3d Finite Element Simulation Model, supplied by Ansoft Corporation, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/3d+finite+element+simulation+model/3d+model/pmc09738035-69-3-9
    Average 90 stars, based on 1 article reviews
    3d finite element simulation model - by Bioz Stars, 2026-11
    90/100 stars

    Images

    Related Articles

    Software:

    Article Title: Analysis and Correction of Measurement Error of Spherical Capacitive Sensor Caused by Assembly Error of the Inner Frame in the Aeronautical Optoelectronic Pod
    Article Snippet: .. We built the 3D finite element simulation model by Ansoft Maxwell software to verify Equations ( ) and ( ). ..

    Article Title: A Multi-Module Electrodynamic Exciter with a Variable Pole-Arc Ratio Disk Halbach Array for a High-Bandwidth Dynamic Torsional Stiffness Test
    Article Snippet: .. Thus, a 3-D FEM model of the DVCM was built with respect to the analytical results of the quasi-3-D model, with the help of finite-element software ANSOFT. ..

    Article Title: Research on Transmission Line Voltage Measurement Method of D-Dot Sensor Based on Gaussian Integral
    Article Snippet: .. The 3D transmission line model which was constructed using the Ansoft Maxwell simulation software is shown in b. ..

    other:

    Article Title: Wireless, Battery-Free, and Fully Implantable Micro-Coil System for 7 T Brain MRI
    Article Snippet: An elegant solution for the concurrent transmission of data and power is essential for implantable wireless magnetic resonance imaging (MRI).. This paper presents a self-tuned open interior microcoil (MC) antenna with three useful operating bands of 300 (7 T), 400, and 920 MHz, for blood vessel imaging, data telemetry, and efficient wireless transmission of power, respectively.. The proposed open interior MC antenna contains two mirrorlike arms with diameters and lengths of 2.4 mm and 9.8 mm, respectively, to avoid blood flow blockage.

    Article Title: Experimental investigation of design parameters of temperature controlled semi-active shock absorber under different currents and velocities
    Article Snippet: The effectiveness of the design parameters that affect the performance of semi-active shock absorber with magnetorheological (MR) fluid varies with the current excitation and damping velocity.. Temperature has a very important effect on the performance of MR shock absorbers.. In this study, the design parameters of a temperature-controlled MR shock absorber are evaluated under different current excitations and velocities.

    Article Title: Two-dimensional conformal optically-fed phased array and methods of manufacturing the same
    Article Snippet: In some embodiments, a 3D Finite Element Method (FEM) based Electromagnetic solver, Ansoft HFSS, may be employed to design and optimize the patch antennas 815 and coupling slot 827.

    Article Title: Thermoplastic polyurethane flexible capacitive proximity sensor reinforced by CNTs for applications in the creative industries
    Article Snippet: To assure that the capacitance change comes from the fringe phenomenon, a simple 3D model is simulated in Ansoft Maxwell.

    Article Title: Dynamic modeling and vibration response analysis of a synchronous motorized spindle with inclined eccentricity
    Article Snippet: The air-gap eccentricitywill produce unbalancedmagnetic pull and cause vibrations and noises in amotor.. In this study, the dynamic behavior of a synchronous motorized spindle with inclined eccentricity is investigated.. A semi-analytical method is proposed to model the unbalanced magnetic pull and the electromagnetic torque of a rotor with inclined eccentricity, and the semi-analytical method is verified by the finite element method.

    Transmission Assay:

    Article Title: Research on Transmission Line Voltage Measurement Method of D-Dot Sensor Based on Gaussian Integral
    Article Snippet: .. The 3D transmission line model which was constructed using the Ansoft Maxwell simulation software is shown in b. ..

    Construct:

    Article Title: Research on Transmission Line Voltage Measurement Method of D-Dot Sensor Based on Gaussian Integral
    Article Snippet: .. The 3D transmission line model which was constructed using the Ansoft Maxwell simulation software is shown in b. ..



    Similar Products

    3d finite element simulation model  (Abaqus Inc)
    86
    Abaqus Inc 3d finite element simulation model
    3d Finite Element Simulation Model, supplied by Abaqus Inc, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/3d+finite+element+simulation+model/abaqus+element+finite+software/10__1007_slash_s00170___025___15753___y-60-1-14
    Average 86 stars, based on 1 article reviews
    3d finite element simulation model - by Bioz Stars, 2026-11
    86/100 stars
    		  Buy from Supplier
    3d comsol® finite element modeling simulations  (COMSOL Inc)
    90
    COMSOL Inc 3d comsol® finite element modeling simulations
    a , b <t>A-posteriori</t> <t>2D</t> COMSOL® simulations of the devices shown in Fig. and agreement with the experimental data in predicting \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 a and f s b . The error bars show the maximum and minimum measured value per data point. In c , COMSOL® simulations of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 as function of Sc-doping of the piezoelectric film for different metal electrodes are provided. The simulated device has an h / λ ratio of 0.4. The IDT thicknesses are 95, 30, 40, and 70 nm for Al, Pt, W, and Mo, respectively. This optimal values were found via COMSOL® <t>FEM.</t>
    3d Comsol® Finite Element Modeling Simulations, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/3d+finite+element+simulation+model/comsol+multiphysics/pmc10770411-131-14-10
    Average 90 stars, based on 1 article reviews
    3d comsol® finite element modeling simulations - by Bioz Stars, 2026-11
    90/100 stars
    		  Buy from Supplier
    3d finite element magnetic leakage simulation model  (ANSYS inc)
    90
    ANSYS inc 3d finite element magnetic leakage simulation model
    a , b <t>A-posteriori</t> <t>2D</t> COMSOL® simulations of the devices shown in Fig. and agreement with the experimental data in predicting \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 a and f s b . The error bars show the maximum and minimum measured value per data point. In c , COMSOL® simulations of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 as function of Sc-doping of the piezoelectric film for different metal electrodes are provided. The simulated device has an h / λ ratio of 0.4. The IDT thicknesses are 95, 30, 40, and 70 nm for Al, Pt, W, and Mo, respectively. This optimal values were found via COMSOL® <t>FEM.</t>
    3d Finite Element Magnetic Leakage Simulation Model, supplied by ANSYS inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/3d+finite+element+simulation+model/3d+finite+element+magnetic+leakage+simulation+model/10__1016_slash_j__ijpvp__2023__104892-74-16-26
    Average 90 stars, based on 1 article reviews
    3d finite element magnetic leakage simulation model - by Bioz Stars, 2026-11
    90/100 stars
    		  Buy from Supplier
    3d modeling and finite element simulation  (ANSYS inc)
    90
    ANSYS inc 3d modeling and finite element simulation
    a , b <t>A-posteriori</t> <t>2D</t> COMSOL® simulations of the devices shown in Fig. and agreement with the experimental data in predicting \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 a and f s b . The error bars show the maximum and minimum measured value per data point. In c , COMSOL® simulations of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 as function of Sc-doping of the piezoelectric film for different metal electrodes are provided. The simulated device has an h / λ ratio of 0.4. The IDT thicknesses are 95, 30, 40, and 70 nm for Al, Pt, W, and Mo, respectively. This optimal values were found via COMSOL® <t>FEM.</t>
    3d Modeling And Finite Element Simulation, supplied by ANSYS inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/3d+finite+element+simulation+model/3d+model/pm36580436-66-27-37
    Average 90 stars, based on 1 article reviews
    3d modeling and finite element simulation - by Bioz Stars, 2026-11
    90/100 stars
    		  Buy from Supplier
    3d finite element simulation model  (Ansoft Corporation)
    90
    Ansoft Corporation 3d finite element simulation model
    a , b <t>A-posteriori</t> <t>2D</t> COMSOL® simulations of the devices shown in Fig. and agreement with the experimental data in predicting \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 a and f s b . The error bars show the maximum and minimum measured value per data point. In c , COMSOL® simulations of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 as function of Sc-doping of the piezoelectric film for different metal electrodes are provided. The simulated device has an h / λ ratio of 0.4. The IDT thicknesses are 95, 30, 40, and 70 nm for Al, Pt, W, and Mo, respectively. This optimal values were found via COMSOL® <t>FEM.</t>
    3d Finite Element Simulation Model, supplied by Ansoft Corporation, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/3d+finite+element+simulation+model/3d+model/pmc09738035-69-3-9
    Average 90 stars, based on 1 article reviews
    3d finite element simulation model - by Bioz Stars, 2026-11
    90/100 stars
    		  Buy from Supplier
    3d finite element modelling (fem) simulation  (COMSOL Inc)
    90
    COMSOL Inc 3d finite element modelling (fem) simulation
    a , b <t>A-posteriori</t> <t>2D</t> COMSOL® simulations of the devices shown in Fig. and agreement with the experimental data in predicting \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 a and f s b . The error bars show the maximum and minimum measured value per data point. In c , COMSOL® simulations of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 as function of Sc-doping of the piezoelectric film for different metal electrodes are provided. The simulated device has an h / λ ratio of 0.4. The IDT thicknesses are 95, 30, 40, and 70 nm for Al, Pt, W, and Mo, respectively. This optimal values were found via COMSOL® <t>FEM.</t>
    3d Finite Element Modelling (Fem) Simulation, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/3d+finite+element+simulation+model/3d+model/pmc09323606-46-3-10
    Average 90 stars, based on 1 article reviews
    3d finite element modelling (fem) simulation - by Bioz Stars, 2026-11
    90/100 stars
    		  Buy from Supplier
    abaqus-simulated eight 3d finite element models  (Abaqus Inc)
    90
    Abaqus Inc abaqus-simulated eight 3d finite element models
    a , b <t>A-posteriori</t> <t>2D</t> COMSOL® simulations of the devices shown in Fig. and agreement with the experimental data in predicting \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 a and f s b . The error bars show the maximum and minimum measured value per data point. In c , COMSOL® simulations of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 as function of Sc-doping of the piezoelectric film for different metal electrodes are provided. The simulated device has an h / λ ratio of 0.4. The IDT thicknesses are 95, 30, 40, and 70 nm for Al, Pt, W, and Mo, respectively. This optimal values were found via COMSOL® <t>FEM.</t>
    Abaqus Simulated Eight 3d Finite Element Models, supplied by Abaqus Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/3d+finite+element+simulation+model/abaqus+simulated+eight+3d+finite+element+models/pm34785045-79-2-0
    Average 90 stars, based on 1 article reviews
    abaqus-simulated eight 3d finite element models - by Bioz Stars, 2026-11
    90/100 stars
    		  Buy from Supplier
    3d electrostatic-fluid-structure multiphysics coupling finite element simulation model  (COMSOL Inc)
    90
    COMSOL Inc 3d electrostatic-fluid-structure multiphysics coupling finite element simulation model
    a , b <t>A-posteriori</t> <t>2D</t> COMSOL® simulations of the devices shown in Fig. and agreement with the experimental data in predicting \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 a and f s b . The error bars show the maximum and minimum measured value per data point. In c , COMSOL® simulations of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 as function of Sc-doping of the piezoelectric film for different metal electrodes are provided. The simulated device has an h / λ ratio of 0.4. The IDT thicknesses are 95, 30, 40, and 70 nm for Al, Pt, W, and Mo, respectively. This optimal values were found via COMSOL® <t>FEM.</t>
    3d Electrostatic Fluid Structure Multiphysics Coupling Finite Element Simulation Model, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/3d+finite+element+simulation+model/3d+electrostatic+fluid+structure+multiphysics+coupling+finite+element+simulation+model/pmc08838054-62-20-24
    Average 90 stars, based on 1 article reviews
    3d electrostatic-fluid-structure multiphysics coupling finite element simulation model - by Bioz Stars, 2026-11
    90/100 stars
    		  Buy from Supplier

    Image Search Results


    a , b A-posteriori 2D COMSOL® simulations of the devices shown in Fig. and agreement with the experimental data in predicting \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 a and f s b . The error bars show the maximum and minimum measured value per data point. In c , COMSOL® simulations of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 as function of Sc-doping of the piezoelectric film for different metal electrodes are provided. The simulated device has an h / λ ratio of 0.4. The IDT thicknesses are 95, 30, 40, and 70 nm for Al, Pt, W, and Mo, respectively. This optimal values were found via COMSOL® FEM.

    Journal: Nature Communications

    Article Title: Compact and wideband nanoacoustic pass-band filters for future 5G and 6G cellular radios

    doi: 10.1038/s41467-023-44038-9

    Figure Lengend Snippet: a , b A-posteriori 2D COMSOL® simulations of the devices shown in Fig. and agreement with the experimental data in predicting \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 a and f s b . The error bars show the maximum and minimum measured value per data point. In c , COMSOL® simulations of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${k}_{t}^{2}$$\end{document} k t 2 as function of Sc-doping of the piezoelectric film for different metal electrodes are provided. The simulated device has an h / λ ratio of 0.4. The IDT thicknesses are 95, 30, 40, and 70 nm for Al, Pt, W, and Mo, respectively. This optimal values were found via COMSOL® FEM.

    Article Snippet: The design optimization process was performed via 2D and 3D COMSOL® Finite Element Modeling (FEM) simulations, and is further discussed in the Methods section.

    Techniques: