Journal: Frontiers in Chemistry

Article Title: Thermal degradation behavior and flame retardant properties of PET/DiDOPO conjugated flame retardant composites*

doi: 10.3389/fchem.2022.1018998

Figure Lengend Snippet: (A) UL-94 test process of PET/DIDOPO conjugated flame retardant composite; (B) The digital photoshops of the PET/DIDOPO samples after UL-94 tests and LOI test; Evolution of storage modulus (C) , loss modulus (D) , and complex viscosity (E) as a function of frequency for PET/DIDOPO composites.

Article Snippet: Polyethylene terephthalate (PET) slices (SD500, intrinsic viscosity coefficient 0.68 dl/g): Sinopec Yizheng Chemical Fiber Co., Ltd.; Phenethyl bridged DOPO derivative (DIDOPO) was obtained from our laboratory ( ).

Techniques:

Journal: Polymers

Article Title: Optimization of the Physical Properties of HDPE/PU Blends through Improved Compatibility and Electron Beam Crosslinking

doi: 10.3390/polym14173607

Figure Lengend Snippet: Elemental composition analysis of the HDPE/PU blends with PE-g-MA and TMPTMA by energy-dispersive X-ray spectroscopy. (Carbon: Green; Oxygen: Blue; Nitrogen: Red).

Article Snippet: Polyethylene-graft-maleic anhydride (PE-g-MA) (viscosity of 500 cP) was purchased from Sigma-Aldrich (St. Louis, MO, USA).

Techniques: Spectroscopy

Journal: Polymers

Article Title: Optimization of the Physical Properties of HDPE/PU Blends through Improved Compatibility and Electron Beam Crosslinking

doi: 10.3390/polym14173607

Figure Lengend Snippet: Physical and mechanical properties of HDPE/PU blends with compatibilizer at 100 kGy of radiation dose: ( A ) gel fraction; ( B ) tensile strength; ( C ) tensile strain.

Article Snippet: Polyethylene-graft-maleic anhydride (PE-g-MA) (viscosity of 500 cP) was purchased from Sigma-Aldrich (St. Louis, MO, USA).

Techniques:

Journal: Polymers

Article Title: Optimization of the Physical Properties of HDPE/PU Blends through Improved Compatibility and Electron Beam Crosslinking

doi: 10.3390/polym14173607

Figure Lengend Snippet: Thermal shrinkage of the HDPE/PU blends without irradiation at 150 and 180 °C for 1 h: ( A ) optical images; ( B ) reduction rate.

Article Snippet: Polyethylene-graft-maleic anhydride (PE-g-MA) (viscosity of 500 cP) was purchased from Sigma-Aldrich (St. Louis, MO, USA).

Techniques: Irradiation

Journal: Polymers

Article Title: Optimization of the Physical Properties of HDPE/PU Blends through Improved Compatibility and Electron Beam Crosslinking

doi: 10.3390/polym14173607

Figure Lengend Snippet: Elemental composition analysis of the HDPE/PU blends with different amounts of PU by energy-dispersive X-ray spectroscopy (Carbon: Green; Oxygen: Blue; Nitrogen: Red).

Article Snippet: Polyethylene-graft-maleic anhydride (PE-g-MA) (viscosity of 500 cP) was purchased from Sigma-Aldrich (St. Louis, MO, USA).

Techniques: Spectroscopy

Journal: Polymers

Article Title: Optimization of the Physical Properties of HDPE/PU Blends through Improved Compatibility and Electron Beam Crosslinking

doi: 10.3390/polym14173607

Figure Lengend Snippet: Gel fraction of the HDPE/PU blends: ( A ) Different amounts of PU with a radiation dose of 100 kGy. ( B ) Different radiation doses at 50, 75, and 100 kGy and mechanical properties of the HDPE/PU blends with a radiation dose of 100 kGy: ( C ) Tensile strength, ( D ) tensile strain, and ( E ) flexural modulus.

Article Snippet: Polyethylene-graft-maleic anhydride (PE-g-MA) (viscosity of 500 cP) was purchased from Sigma-Aldrich (St. Louis, MO, USA).

Techniques:

Journal: Polymers

Article Title: Optimization of the Physical Properties of HDPE/PU Blends through Improved Compatibility and Electron Beam Crosslinking

doi: 10.3390/polym14173607

Figure Lengend Snippet: Thermal shrinkage of the HDPE/PU blends with different amounts of PU at 150 and 180 °C for 1 h: ( A ) 0 kGy and ( B ) 100 kGy.

Article Snippet: Polyethylene-graft-maleic anhydride (PE-g-MA) (viscosity of 500 cP) was purchased from Sigma-Aldrich (St. Louis, MO, USA).

Techniques:

Journal: Polymers

Article Title: Optimization of the Physical Properties of HDPE/PU Blends through Improved Compatibility and Electron Beam Crosslinking

doi: 10.3390/polym14173607

Figure Lengend Snippet: Mechanical properties of the HDPE/PU blends with different amounts of PU after thermal aging at 23, 125, and 150 °C for 2 h: ( A ) Tensile strength and ( B ) tensile strain.

Article Snippet: Polyethylene-graft-maleic anhydride (PE-g-MA) (viscosity of 500 cP) was purchased from Sigma-Aldrich (St. Louis, MO, USA).

Techniques: