Review



o bis  (Thermo Fisher)


Bioz Verified Symbol Thermo Fisher is a verified supplier
Bioz Manufacturer Symbol Thermo Fisher manufactures this product  
  • Logo
  • About
  • News
  • Press Release
  • Partners
  • Contact
  • Bioz Stars
  • Bioz vStars
  • 94

    Structured Review

    Thermo Fisher o bis
    O Bis, supplied by Thermo Fisher, used in various techniques. Bioz Stars score: 94/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/argon/N%2CO-Bis(trimethylsilyl)trifluoroacetamide%2C+with+1%25+TMCS%2C+packaged+under+Argon+in+resealable+ChemSeal+bottles/pm42332570-97-27-53
    Average 94 stars, based on 1 article reviews
    o bis - by Bioz Stars, 2026-11
    94/100 stars

    Images

    Related Articles

    other:

    Article Title: Validation of ICNIRP estimates of toxicity thresholds for NIR (785 nm) light in the retinas of pigmented rabbits.
    Article Snippet: The International Commission on Non-Ionizing Radiation Protection (ICNIRP) established eye-safe exposure limits for laser light based on estimates of the 50% exposure dose (ED50) for retinal damage in animals.. The ED50 has not been determined for continuous-wave near-infrared (NIR) light, as may be used in instruments for spectroscopic analysis of the eye.. The purpose of this study is to determine the ED50 of 785-nm light delivered by a Raman spectroscopy instrument on the retinas of pigmented rabbits, and to compare that ED50 to the ICNIRP estimates.

    Article Title: The effect of the Fermi resonance on the Raman scattering cross sections of the Fermi doublet ν1 and 2ν2 of liquid carbon disulfide in benzene.
    Article Snippet: The effect of the Fermi resonance (FR) on the Raman scattering cross sections (RSCSs) of the Fermi doublet 1, 2 2 of liquid CS2 in C6H6 using the method of changing the volume concentration of the solution is investigated.. We have calculated the RSCSs of the Fermi doublet 1, 2 2 using Onsager’s theory with the 992 cm−1 Raman line of C6H6 as the internal standard.. The result shows that the RSCS of the 1 line decreases with decreasing the volume concentration of CS2, while that of the 2 2 line unexpectedly increases.

    Article Title: New Volatile Sulfur-Containing Constituents in a Simultaneous Distillation−Extraction Extract of Red Bell Peppers (Capsicum annuum)
    Article Snippet: An extract of red bell peppers (Capsicum annuum) was prepared by simultaneous distillation-extraction (SDE, Likens-Nickerson).. In addition to the already known (3E)-3-hepten-2-one (1), the unsaturated C9-ketones 1-nonen-4-one (2), (2E)-2-nonen-4-one (3), and (2E,5E)-2,5-nonadien-4-one (4), 2-methoxy-3-isobutylpyrazine (5), and heptane-2-thiol (6), we identified 19 new thiols (the aliphatic saturated and unsaturated thiols 14–16, and 22–27, the mercapto-ketones 12 and 13, the mercapto-alcohols 17, 18, and 30, the dithiols 19 and 28, the methylthio-thiols 20 and 21, and the thiophene-thiol 31) and the two new dithiolanes 10 and 29.. All of them are structurally related to the unsaturated C7and C9-ketones 1-4.

    Fluorescence:

    Article Title: Nuclear translocation of the p65 subunit of NF-kappaB in L5178Y sublines differing in antioxidant defense.
    Article Snippet: We examined the induction of nuclear translocation of the p65 subunit of NF-κB in L5178Y (LY) cells.. We used two LY sublines which are inversely cross-sensitive to hydrogen peroxide and x-rays: LY-R cells are radioresistant and oxidant-sensitive, whereas LY-S cells are radiosensitive and oxidant-resistant.. Hydrogen peroxide, phorbol ester and x-rays caused a marked translocation of p65-NF-κB in LY-R cells and a weak translocation in LY-S cells.

    Polymer:

    Article Title: Combination of main-chain and side-chain sulfonation of PFCB-6F high-temperature fuel cell membranes
    Article Snippet: .. The mixture is heated in an oil bath set at 130° C., and the polymer starts to dissolve rapidly between 80 and 95° C. While the stirred solution is being heated in the oil bath at 130° C. under argon, copper powder (15.47 g, 45-micrometer particles, Acros 196575000) is rapidly added and the mixture is stirred for 2 hours. ..



    Similar Products

    94
    Thermo Fisher o bis
    O Bis, supplied by Thermo Fisher, used in various techniques. Bioz Stars score: 94/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/argon/N%2CO-Bis(trimethylsilyl)trifluoroacetamide%2C+with+1%25+TMCS%2C+packaged+under+Argon+in+resealable+ChemSeal+bottles/pm42332570-97-27-53
    Average 94 stars, based on 1 article reviews
    o bis - by Bioz Stars, 2026-11
    94/100 stars
      Buy from Supplier

    93
    Coherent Corp argon fluoride excimer laser
    Argon Fluoride Excimer Laser, supplied by Coherent Corp, used in various techniques. Bioz Stars score: 93/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/argon/EXCISTAR/pm42916771-39-7-13
    Average 93 stars, based on 1 article reviews
    argon fluoride excimer laser - by Bioz Stars, 2026-11
    93/100 stars
      Buy from Supplier

    99
    Quorum Technologies argon atmosphere
    Argon Atmosphere, supplied by Quorum Technologies, used in various techniques. Bioz Stars score: 99/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/argon/RotaQ+ES+Rotary+Pump+Sputter+Coater/10__1002_slash_adem__71332-90-20-25
    Average 99 stars, based on 1 article reviews
    argon atmosphere - by Bioz Stars, 2026-11
    99/100 stars
      Buy from Supplier

    96
    Gamry Instruments argon atmosphere
    a The schematic recycling process including selective Nd dissolution from NdFeB magnets anode and continuous deposition of liquid Mg–Nd alloy. b Mg–Nd phase diagram with the schematic Mg-cathode’s surface composition change during the electrolysis. (Stage I denotes the initial solid Mg cathode; stage II denotes the formation and growth of a liquid Mg–Nd alloy layer following Nd deposition; stage III denotes detachment of the liquid alloy and exposure of fresh Mg, after which the cycle returns to stage I). c <t>Electrochemical</t> behavior of dominant elements in NdFeB magnets by CV (100 mV·s −1 , (LiCl–30 mol% LiF)–0.5 mol% Ni 2+ , Fe 2+ or Nd 3+ , 590 °C). d Anodic dissolution potentials depending on current density (LiCl–30 mol% LiF, 590 °C), the horizontal dash line indicates the redox electrode potential of iron obtained from ( c ). e The change of ion concentration in molten salt electrolyte during electrolysis at anodic current density of 0.05 A·cm −2 . For e , data are presented as mean ± s.d. from n = 3 independent electrolysis experiments. f Photograph and SEM-EDS results of the magnesium cathode, and g photograph and SEM-EDS results of the cathodic product Mg–Nd alloy after electrolysis at 590 °C (cathodic current density: 0.75 A·cm −2 , t: 300 s). The experiments shown in f and g were independently repeated three times with similar results. h , Current efficiencies for electrolysis using cathodes of solid magnesium at 520 °C, molybdenum at 590 °C and magnesium at 590 °C, respectively. Data are presented as mean values ± s.d.; circles indicate individual values ( n = 3 independent electrolysis experiments for each condition). Source data are provided as a file.
    Argon Atmosphere, supplied by Gamry Instruments, used in various techniques. Bioz Stars score: 96/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/argon/Interface+5000E/pmc13751600-197-13-21
    Average 96 stars, based on 1 article reviews
    argon atmosphere - by Bioz Stars, 2026-11
    96/100 stars
      Buy from Supplier

    97
    Hitachi Ltd im4000 plus argon broadbeam polisher
    a The schematic recycling process including selective Nd dissolution from NdFeB magnets anode and continuous deposition of liquid Mg–Nd alloy. b Mg–Nd phase diagram with the schematic Mg-cathode’s surface composition change during the electrolysis. (Stage I denotes the initial solid Mg cathode; stage II denotes the formation and growth of a liquid Mg–Nd alloy layer following Nd deposition; stage III denotes detachment of the liquid alloy and exposure of fresh Mg, after which the cycle returns to stage I). c <t>Electrochemical</t> behavior of dominant elements in NdFeB magnets by CV (100 mV·s −1 , (LiCl–30 mol% LiF)–0.5 mol% Ni 2+ , Fe 2+ or Nd 3+ , 590 °C). d Anodic dissolution potentials depending on current density (LiCl–30 mol% LiF, 590 °C), the horizontal dash line indicates the redox electrode potential of iron obtained from ( c ). e The change of ion concentration in molten salt electrolyte during electrolysis at anodic current density of 0.05 A·cm −2 . For e , data are presented as mean ± s.d. from n = 3 independent electrolysis experiments. f Photograph and SEM-EDS results of the magnesium cathode, and g photograph and SEM-EDS results of the cathodic product Mg–Nd alloy after electrolysis at 590 °C (cathodic current density: 0.75 A·cm −2 , t: 300 s). The experiments shown in f and g were independently repeated three times with similar results. h , Current efficiencies for electrolysis using cathodes of solid magnesium at 520 °C, molybdenum at 590 °C and magnesium at 590 °C, respectively. Data are presented as mean values ± s.d.; circles indicate individual values ( n = 3 independent electrolysis experiments for each condition). Source data are provided as a file.
    Im4000 Plus Argon Broadbeam Polisher, supplied by Hitachi Ltd, used in various techniques. Bioz Stars score: 97/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/argon/IM4000/10__1016_slash_j__msea__2026__151172-70-12-11
    Average 97 stars, based on 1 article reviews
    im4000 plus argon broadbeam polisher - by Bioz Stars, 2026-11
    97/100 stars
      Buy from Supplier

    86
    Airgas Inc high purity argon
    a The schematic recycling process including selective Nd dissolution from NdFeB magnets anode and continuous deposition of liquid Mg–Nd alloy. b Mg–Nd phase diagram with the schematic Mg-cathode’s surface composition change during the electrolysis. (Stage I denotes the initial solid Mg cathode; stage II denotes the formation and growth of a liquid Mg–Nd alloy layer following Nd deposition; stage III denotes detachment of the liquid alloy and exposure of fresh Mg, after which the cycle returns to stage I). c <t>Electrochemical</t> behavior of dominant elements in NdFeB magnets by CV (100 mV·s −1 , (LiCl–30 mol% LiF)–0.5 mol% Ni 2+ , Fe 2+ or Nd 3+ , 590 °C). d Anodic dissolution potentials depending on current density (LiCl–30 mol% LiF, 590 °C), the horizontal dash line indicates the redox electrode potential of iron obtained from ( c ). e The change of ion concentration in molten salt electrolyte during electrolysis at anodic current density of 0.05 A·cm −2 . For e , data are presented as mean ± s.d. from n = 3 independent electrolysis experiments. f Photograph and SEM-EDS results of the magnesium cathode, and g photograph and SEM-EDS results of the cathodic product Mg–Nd alloy after electrolysis at 590 °C (cathodic current density: 0.75 A·cm −2 , t: 300 s). The experiments shown in f and g were independently repeated three times with similar results. h , Current efficiencies for electrolysis using cathodes of solid magnesium at 520 °C, molybdenum at 590 °C and magnesium at 590 °C, respectively. Data are presented as mean values ± s.d.; circles indicate individual values ( n = 3 independent electrolysis experiments for each condition). Source data are provided as a file.
    High Purity Argon, supplied by Airgas Inc, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/argon/argon+high+purity+ultra/pm42284157-102-7-10
    Average 86 stars, based on 1 article reviews
    high purity argon - by Bioz Stars, 2026-11
    86/100 stars
      Buy from Supplier

    86
    Air Liquide argon
    a The schematic recycling process including selective Nd dissolution from NdFeB magnets anode and continuous deposition of liquid Mg–Nd alloy. b Mg–Nd phase diagram with the schematic Mg-cathode’s surface composition change during the electrolysis. (Stage I denotes the initial solid Mg cathode; stage II denotes the formation and growth of a liquid Mg–Nd alloy layer following Nd deposition; stage III denotes detachment of the liquid alloy and exposure of fresh Mg, after which the cycle returns to stage I). c <t>Electrochemical</t> behavior of dominant elements in NdFeB magnets by CV (100 mV·s −1 , (LiCl–30 mol% LiF)–0.5 mol% Ni 2+ , Fe 2+ or Nd 3+ , 590 °C). d Anodic dissolution potentials depending on current density (LiCl–30 mol% LiF, 590 °C), the horizontal dash line indicates the redox electrode potential of iron obtained from ( c ). e The change of ion concentration in molten salt electrolyte during electrolysis at anodic current density of 0.05 A·cm −2 . For e , data are presented as mean ± s.d. from n = 3 independent electrolysis experiments. f Photograph and SEM-EDS results of the magnesium cathode, and g photograph and SEM-EDS results of the cathodic product Mg–Nd alloy after electrolysis at 590 °C (cathodic current density: 0.75 A·cm −2 , t: 300 s). The experiments shown in f and g were independently repeated three times with similar results. h , Current efficiencies for electrolysis using cathodes of solid magnesium at 520 °C, molybdenum at 590 °C and magnesium at 590 °C, respectively. Data are presented as mean values ± s.d.; circles indicate individual values ( n = 3 independent electrolysis experiments for each condition). Source data are provided as a file.
    Argon, supplied by Air Liquide, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/argon/argon+%E2%80%A2/pm42143984-53-1-8
    Average 86 stars, based on 1 article reviews
    argon - by Bioz Stars, 2026-11
    86/100 stars
      Buy from Supplier

    99
    HORIBA Ltd argon ion laser
    a The schematic recycling process including selective Nd dissolution from NdFeB magnets anode and continuous deposition of liquid Mg–Nd alloy. b Mg–Nd phase diagram with the schematic Mg-cathode’s surface composition change during the electrolysis. (Stage I denotes the initial solid Mg cathode; stage II denotes the formation and growth of a liquid Mg–Nd alloy layer following Nd deposition; stage III denotes detachment of the liquid alloy and exposure of fresh Mg, after which the cycle returns to stage I). c <t>Electrochemical</t> behavior of dominant elements in NdFeB magnets by CV (100 mV·s −1 , (LiCl–30 mol% LiF)–0.5 mol% Ni 2+ , Fe 2+ or Nd 3+ , 590 °C). d Anodic dissolution potentials depending on current density (LiCl–30 mol% LiF, 590 °C), the horizontal dash line indicates the redox electrode potential of iron obtained from ( c ). e The change of ion concentration in molten salt electrolyte during electrolysis at anodic current density of 0.05 A·cm −2 . For e , data are presented as mean ± s.d. from n = 3 independent electrolysis experiments. f Photograph and SEM-EDS results of the magnesium cathode, and g photograph and SEM-EDS results of the cathodic product Mg–Nd alloy after electrolysis at 590 °C (cathodic current density: 0.75 A·cm −2 , t: 300 s). The experiments shown in f and g were independently repeated three times with similar results. h , Current efficiencies for electrolysis using cathodes of solid magnesium at 520 °C, molybdenum at 590 °C and magnesium at 590 °C, respectively. Data are presented as mean values ± s.d.; circles indicate individual values ( n = 3 independent electrolysis experiments for each condition). Source data are provided as a file.
    Argon Ion Laser, supplied by HORIBA Ltd, used in various techniques. Bioz Stars score: 99/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/argon/LabRAM+HR+Evolution/pm42046544-83-17-24
    Average 99 stars, based on 1 article reviews
    argon ion laser - by Bioz Stars, 2026-11
    99/100 stars
      Buy from Supplier

    86
    Fisher Scientific argon gas 1 3 diamino 2 propanol
    ( A ) Previously developed sulfonyl‐based solid support strategy for the incorporation of amino modifiers ( S ‐CPG). In some implementations, S ‐CPG can also be conjugated to the solid support through a carbamate linkage. ( B ) This work focuses on the use of CPR II CPG to incorporate amino modifiers via initial activation with N , N ′‐disuccinimidyl carbonate (DSC), generating R ‐CPG. A trifunctional ligand (protected <t>1,3‐diamino‐2‐propanol)</t> enables anchoring to the solid support, followed by selective conjugation at the amine and subsequent strand elongation from the hydroxyl group.
    Argon Gas 1 3 Diamino 2 Propanol, supplied by Fisher Scientific, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/argon/argon+gas/pmc13169238-56-0-3
    Average 86 stars, based on 1 article reviews
    argon gas 1 3 diamino 2 propanol - by Bioz Stars, 2026-11
    86/100 stars
      Buy from Supplier

    86
    Cressington Scientific Instruments argon
    ( A ) Previously developed sulfonyl‐based solid support strategy for the incorporation of amino modifiers ( S ‐CPG). In some implementations, S ‐CPG can also be conjugated to the solid support through a carbamate linkage. ( B ) This work focuses on the use of CPR II CPG to incorporate amino modifiers via initial activation with N , N ′‐disuccinimidyl carbonate (DSC), generating R ‐CPG. A trifunctional ligand (protected <t>1,3‐diamino‐2‐propanol)</t> enables anchoring to the solid support, followed by selective conjugation at the amine and subsequent strand elongation from the hydroxyl group.
    Argon, supplied by Cressington Scientific Instruments, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/argon/coater+sputter/pm42129224-512-5-6
    Average 86 stars, based on 1 article reviews
    argon - by Bioz Stars, 2026-11
    86/100 stars
      Buy from Supplier

    Image Search Results


    a The schematic recycling process including selective Nd dissolution from NdFeB magnets anode and continuous deposition of liquid Mg–Nd alloy. b Mg–Nd phase diagram with the schematic Mg-cathode’s surface composition change during the electrolysis. (Stage I denotes the initial solid Mg cathode; stage II denotes the formation and growth of a liquid Mg–Nd alloy layer following Nd deposition; stage III denotes detachment of the liquid alloy and exposure of fresh Mg, after which the cycle returns to stage I). c Electrochemical behavior of dominant elements in NdFeB magnets by CV (100 mV·s −1 , (LiCl–30 mol% LiF)–0.5 mol% Ni 2+ , Fe 2+ or Nd 3+ , 590 °C). d Anodic dissolution potentials depending on current density (LiCl–30 mol% LiF, 590 °C), the horizontal dash line indicates the redox electrode potential of iron obtained from ( c ). e The change of ion concentration in molten salt electrolyte during electrolysis at anodic current density of 0.05 A·cm −2 . For e , data are presented as mean ± s.d. from n = 3 independent electrolysis experiments. f Photograph and SEM-EDS results of the magnesium cathode, and g photograph and SEM-EDS results of the cathodic product Mg–Nd alloy after electrolysis at 590 °C (cathodic current density: 0.75 A·cm −2 , t: 300 s). The experiments shown in f and g were independently repeated three times with similar results. h , Current efficiencies for electrolysis using cathodes of solid magnesium at 520 °C, molybdenum at 590 °C and magnesium at 590 °C, respectively. Data are presented as mean values ± s.d.; circles indicate individual values ( n = 3 independent electrolysis experiments for each condition). Source data are provided as a file.

    Journal: Nature Communications

    Article Title: Securing critical rare-earth supply through end-of-life NdFeB magnets recycling via molten salt electrolysis with consumable Mg-cathode

    doi: 10.1038/s41467-026-78305-2

    Figure Lengend Snippet: a The schematic recycling process including selective Nd dissolution from NdFeB magnets anode and continuous deposition of liquid Mg–Nd alloy. b Mg–Nd phase diagram with the schematic Mg-cathode’s surface composition change during the electrolysis. (Stage I denotes the initial solid Mg cathode; stage II denotes the formation and growth of a liquid Mg–Nd alloy layer following Nd deposition; stage III denotes detachment of the liquid alloy and exposure of fresh Mg, after which the cycle returns to stage I). c Electrochemical behavior of dominant elements in NdFeB magnets by CV (100 mV·s −1 , (LiCl–30 mol% LiF)–0.5 mol% Ni 2+ , Fe 2+ or Nd 3+ , 590 °C). d Anodic dissolution potentials depending on current density (LiCl–30 mol% LiF, 590 °C), the horizontal dash line indicates the redox electrode potential of iron obtained from ( c ). e The change of ion concentration in molten salt electrolyte during electrolysis at anodic current density of 0.05 A·cm −2 . For e , data are presented as mean ± s.d. from n = 3 independent electrolysis experiments. f Photograph and SEM-EDS results of the magnesium cathode, and g photograph and SEM-EDS results of the cathodic product Mg–Nd alloy after electrolysis at 590 °C (cathodic current density: 0.75 A·cm −2 , t: 300 s). The experiments shown in f and g were independently repeated three times with similar results. h , Current efficiencies for electrolysis using cathodes of solid magnesium at 520 °C, molybdenum at 590 °C and magnesium at 590 °C, respectively. Data are presented as mean values ± s.d.; circles indicate individual values ( n = 3 independent electrolysis experiments for each condition). Source data are provided as a file.

    Article Snippet: All the electrochemical experiments were conducted in a sealed stainless-steel reactor under an argon atmosphere with an electrochemical workstation (Interface 5000E, Gamry Instruments).

    Techniques: Dissolution, Electrolysis, Concentration Assay

    ( A ) Previously developed sulfonyl‐based solid support strategy for the incorporation of amino modifiers ( S ‐CPG). In some implementations, S ‐CPG can also be conjugated to the solid support through a carbamate linkage. ( B ) This work focuses on the use of CPR II CPG to incorporate amino modifiers via initial activation with N , N ′‐disuccinimidyl carbonate (DSC), generating R ‐CPG. A trifunctional ligand (protected 1,3‐diamino‐2‐propanol) enables anchoring to the solid support, followed by selective conjugation at the amine and subsequent strand elongation from the hydroxyl group.

    Journal: Current Protocols

    Article Title: A Facile Strategy for 3′‐Terminal Functionalization of DNA and RNA via On‐Column Conjugation with Integration into Tandem Oligonucleotide Synthesis

    doi: 10.1002/cpz1.70374

    Figure Lengend Snippet: ( A ) Previously developed sulfonyl‐based solid support strategy for the incorporation of amino modifiers ( S ‐CPG). In some implementations, S ‐CPG can also be conjugated to the solid support through a carbamate linkage. ( B ) This work focuses on the use of CPR II CPG to incorporate amino modifiers via initial activation with N , N ′‐disuccinimidyl carbonate (DSC), generating R ‐CPG. A trifunctional ligand (protected 1,3‐diamino‐2‐propanol) enables anchoring to the solid support, followed by selective conjugation at the amine and subsequent strand elongation from the hydroxyl group.

    Article Snippet: Argon gas 1,3‐Diamino‐2‐propanol (Fisher Scientific, cat. no. AAA1961809) 1,8‐Diazabicyclo[5.4.0]undec‐7‐ene (DBU; Combi‐Blocks, cat. no. QA‐1443) 4‐Methoxytrityl chloride (MMTr‐Cl; Tokyo Chemical Industry, cat. no. M0790) Dichloromethane (DCM; ACS grade, Sigma‐Aldrich, cat. no. 34856) Methanol (MeOH; HPLC grade, Sigma‐Aldrich, cat. no. 34860) Silica gel (60 Å, 230‐400 mesh; Fisher Chemical, S82525) Deuterated DMSO (DMSO‐d 6 ; Sigma‐Aldrich, cat. no. 151874‐10 × 0.75ML) 2,5‐Dioxopyrrolidin‐1‐yl 2‐(prop‐2‐yn‐1‐yloxy)acetate (NHS‐ester propargyl; Combi‐Blocks, cat. no. JP‐4311) 200 mM HEPES buffer, pH 8 4 × 35‐cm (diameter × height) flash chromatography column 300‐MHz nuclear magnetic resonance (NMR) instrument (other instruments may be used)

    Techniques: Activation Assay, Conjugation Assay

    Synthesis of protected 1,3‐diamino‐2‐propanol ( A ) for on‐column coupling and subsequent conjugation using NHS‐ester chemistry, illustrated here with propargyl ( B ).

    Journal: Current Protocols

    Article Title: A Facile Strategy for 3′‐Terminal Functionalization of DNA and RNA via On‐Column Conjugation with Integration into Tandem Oligonucleotide Synthesis

    doi: 10.1002/cpz1.70374

    Figure Lengend Snippet: Synthesis of protected 1,3‐diamino‐2‐propanol ( A ) for on‐column coupling and subsequent conjugation using NHS‐ester chemistry, illustrated here with propargyl ( B ).

    Article Snippet: Argon gas 1,3‐Diamino‐2‐propanol (Fisher Scientific, cat. no. AAA1961809) 1,8‐Diazabicyclo[5.4.0]undec‐7‐ene (DBU; Combi‐Blocks, cat. no. QA‐1443) 4‐Methoxytrityl chloride (MMTr‐Cl; Tokyo Chemical Industry, cat. no. M0790) Dichloromethane (DCM; ACS grade, Sigma‐Aldrich, cat. no. 34856) Methanol (MeOH; HPLC grade, Sigma‐Aldrich, cat. no. 34860) Silica gel (60 Å, 230‐400 mesh; Fisher Chemical, S82525) Deuterated DMSO (DMSO‐d 6 ; Sigma‐Aldrich, cat. no. 151874‐10 × 0.75ML) 2,5‐Dioxopyrrolidin‐1‐yl 2‐(prop‐2‐yn‐1‐yloxy)acetate (NHS‐ester propargyl; Combi‐Blocks, cat. no. JP‐4311) 200 mM HEPES buffer, pH 8 4 × 35‐cm (diameter × height) flash chromatography column 300‐MHz nuclear magnetic resonance (NMR) instrument (other instruments may be used)

    Techniques: Conjugation Assay