Review




Structured Review

COMSOL Inc comsol multiphysics 5.5
| Calculated anisotropic photoacoustic near-field spatial distribution generated by a gold nanorod. a , Optical absorption spectrum. The nanorod has a length of 160 nm and a width of 30 nm. The laser has a fluence of 1 mJ cm -2 and a wavelength of 1100 nm. The laser is circularly polarized to excite both the longitudinal and transverse modes of the nanorod. Note that the particular handedness (left or right) is not critical regarding the nanorod's absorption. The inset shows the electric field distribution on resonance (at 1100 nm). The absorption spectrum and the electric field distribution are simulated with a finite element solver (COMSOL Multiphysics 5.5, RF Module, Frequency domain). b, Absorption and second derivative of temperature as a function of time. The temperature profile is simulated using a finite element solver (COMSOL Heat Transfer Module). c, Numerical simulation of the photoacoustic (PA) pressure wave using the partial differential  , simulated with a finite element solver (COMSOL, PDE Module). The corresponding time frames are marked as the red dots in b.
Comsol Multiphysics 5.5, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/direct+time-domain+simulation+comsol+multiphysics/comsol+multiphysics+5+5/pmc09679035-58-9-8
Average 90 stars, based on 1 article reviews
comsol multiphysics 5.5 - by Bioz Stars, 2026-11
90/100 stars

Images

1) Product Images from "Understanding the near-field photoacoustic spatiotemporal profile from nanostructures"

Article Title: Understanding the near-field photoacoustic spatiotemporal profile from nanostructures

Journal: Photoacoustics

doi: 10.1016/j.pacs.2022.100425

| Calculated anisotropic photoacoustic near-field spatial distribution generated by a gold nanorod. a , Optical absorption spectrum. The nanorod has a length of 160 nm and a width of 30 nm. The laser has a fluence of 1 mJ cm -2 and a wavelength of 1100 nm. The laser is circularly polarized to excite both the longitudinal and transverse modes of the nanorod. Note that the particular handedness (left or right) is not critical regarding the nanorod's absorption. The inset shows the electric field distribution on resonance (at 1100 nm). The absorption spectrum and the electric field distribution are simulated with a finite element solver (COMSOL Multiphysics 5.5, RF Module, Frequency domain). b, Absorption and second derivative of temperature as a function of time. The temperature profile is simulated using a finite element solver (COMSOL Heat Transfer Module). c, Numerical simulation of the photoacoustic (PA) pressure wave using the partial differential  , simulated with a finite element solver (COMSOL, PDE Module). The corresponding time frames are marked as the red dots in b.
Figure Legend Snippet: | Calculated anisotropic photoacoustic near-field spatial distribution generated by a gold nanorod. a , Optical absorption spectrum. The nanorod has a length of 160 nm and a width of 30 nm. The laser has a fluence of 1 mJ cm -2 and a wavelength of 1100 nm. The laser is circularly polarized to excite both the longitudinal and transverse modes of the nanorod. Note that the particular handedness (left or right) is not critical regarding the nanorod's absorption. The inset shows the electric field distribution on resonance (at 1100 nm). The absorption spectrum and the electric field distribution are simulated with a finite element solver (COMSOL Multiphysics 5.5, RF Module, Frequency domain). b, Absorption and second derivative of temperature as a function of time. The temperature profile is simulated using a finite element solver (COMSOL Heat Transfer Module). c, Numerical simulation of the photoacoustic (PA) pressure wave using the partial differential , simulated with a finite element solver (COMSOL, PDE Module). The corresponding time frames are marked as the red dots in b.

Techniques Used: Generated

Related Articles

other:

Article Title: Scaling optical computing in synthetic frequency dimension using integrated cavity acousto-optics
Article Snippet: To understand the relation between the acoustooptic modulations and these mechanical modes, we performed the numerical simulations (COMSOL Multiphysics 5.5) and show in Fig. S2 the displacement fields in the suspended AlN/Si layer, corresponding to the resonances measured by the IDT S11 response.

Article Title: Magnetic nanostickers for active control of interface-enhanced selective bioadhesion.
Article Snippet: Simulations of magnetic field and motion of nanostickers Simulations were conducted with COMSOL Multiphysics 5.5.

Article Title: Supporting Information Autonomous Non-Equilibrium Self-Assembly and Molecular Movements Powered by Electrical Energy
Article Snippet: Simulations of SECM experiments were performed using COMSOL Multiphysics 5.5 available on campus.4,5 Figure S3.

Article Title: Fast Degradation of Solid Electrolyte in Initial Cycling Processes, Tracked in 3D by Synchrotron X‑ray Computed Tomography
Article Snippet: The mechanical force field and electric potential field in the LPS solid electrolyte were investigated by COMSOL Multiphysics 5.5 based on finite element method analysis.

Article Title: Numerical simulation of a continuous sonoreactor for cotton cellulose residues recovery.
Article Snippet: COMSOL Multiphysics 5.5 solved the equations in Section 2 and calculated the acoustic pressure distribution throughout the sonoreactor, with and without bubbles attenuation.

Article Title: Influence of statistical approaches on Probabilistic Sweet Spots computation in Deep Brain Stimulation for severe Essential Tremor.
Article Snippet: Once the electrode was placed, Comsol Multiphysics 5.5 (COMSOL AB, Sweden) was used as the simulation environment to run FEM simulations of the EF spread in the tissue.

Article Title: Pericellular oxygen dynamics in human cardiac fibroblasts and iPSC-cardiomyocytes in high-throughput plates: insights from experiments and modeling
Article Snippet: Time-dependent simulations and parameter estimations were performed using COMSOL Multiphysics 5.5 software with LiveLink for MATLAB, and the simulation results were analyzed using MATLAB R2021b.

Article Title: Numerical simulation of a continuous sonoreactor for cotton cellulose residues recovery
Article Snippet: COMSOL Multiphysics 5.5 solved the equations in and calculated the acoustic pressure distribution throughout the sonoreactor, with and without bubbles attenuation.



Similar Products

90
COMSOL Inc direct time-domain simulation comsol multiphysics
Direct Time Domain Simulation Comsol Multiphysics, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/direct+time-domain+simulation+comsol+multiphysics/simulation+program+comsol+multiphysics/pmc07284221-149-21-21
Average 90 stars, based on 1 article reviews
direct time-domain simulation comsol multiphysics - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

Image Search Results