Review




Structured Review

Applied Precision Inc arrayworxe biochip fluorescence reader
Arrayworxe Biochip Fluorescence Reader, supplied by Applied Precision Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/arrayworx%C2%AEe+biochip+reader/arrayworxe+biochip+fluorescence+reader/us08481263-1908-33-37
Average 90 stars, based on 1 article reviews
arrayworxe biochip fluorescence reader - by Bioz Stars, 2026-11
90/100 stars

Images

Related Articles

Fluorescence:

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Protein: Detection of the Cy5 fluorescence labeling in the photo-transferred casein spots as well as the Cy3 fluorescence for measuring the bound allergen-specific IgE was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) with the appropriate standard manufacturer supplied filter sets. ..

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Protein: Detection of the directly incorporated tRNA mediated BODIPY-FL fluorescence labeling as well as binding of the fluorescent calcineurin-Cy5 probe was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) using the appropriate standard built-in filter sets to discriminate between the 2 color fluorophores. ..

Article Title: Methods and compositions for phototransfer
Article Snippet: .. When polymerization is complete, imaging will be performed using an ArrayWoRxe BioChip fluorescence microarray reader (Applied Precision, LLC, Issaquah, Wash.). ..

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Individual spot diameters were measured using the manufacturer supplied software for the ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) and were approximately 100 microns. ..

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Quantum Dots: Detection of the Quantum Dot 605 nm fluorescence emissions was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) using the standard built-in (manufacturer supplied) filter sets. .. The Cy3 filter set was used here to selectively image the Quantum Dot fluorescence.

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Protein: Detection of the Cy5 fluorescence labeling in the photo-transferred casein spots was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) with the appropriate standard manufacturer supplied filter set. ..

Article Title: Novel biotechnological platform based on baculovirus occlusion bodies carrying Babesia bovis small antigenic peptides for the design of a diagnostic enzyme-linked immunosorbent assay (ELISA).
Article Snippet: Baculoviruses are large DNA virus of insects principally employed in recombinant protein expression.. Its ability to form occlusion bodies (OBs), which are composed mainly of polyhedrin protein (POLH), makes them biotechnologically attractive, as these crystals (polyhedra) can incorporate foreign peptides and can be easily isolated.. On the other hand, peptide microarrays allow rapid and inexpensive high-throughput serological screening of new candidates to be incorporated to OBs.

Labeling:

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Protein: Detection of the Cy5 fluorescence labeling in the photo-transferred casein spots as well as the Cy3 fluorescence for measuring the bound allergen-specific IgE was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) with the appropriate standard manufacturer supplied filter sets. ..

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Protein: Detection of the directly incorporated tRNA mediated BODIPY-FL fluorescence labeling as well as binding of the fluorescent calcineurin-Cy5 probe was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) using the appropriate standard built-in filter sets to discriminate between the 2 color fluorophores. ..

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Protein: Detection of the Cy5 fluorescence labeling in the photo-transferred casein spots was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) with the appropriate standard manufacturer supplied filter set. ..

Imaging:

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Protein: Detection of the Cy5 fluorescence labeling in the photo-transferred casein spots as well as the Cy3 fluorescence for measuring the bound allergen-specific IgE was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) with the appropriate standard manufacturer supplied filter sets. ..

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Protein: Detection of the directly incorporated tRNA mediated BODIPY-FL fluorescence labeling as well as binding of the fluorescent calcineurin-Cy5 probe was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) using the appropriate standard built-in filter sets to discriminate between the 2 color fluorophores. ..

Article Title: Methods and compositions for phototransfer
Article Snippet: .. When polymerization is complete, imaging will be performed using an ArrayWoRxe BioChip fluorescence microarray reader (Applied Precision, LLC, Issaquah, Wash.). ..

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Quantum Dots: Detection of the Quantum Dot 605 nm fluorescence emissions was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) using the standard built-in (manufacturer supplied) filter sets. .. The Cy3 filter set was used here to selectively image the Quantum Dot fluorescence.

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Protein: Detection of the Cy5 fluorescence labeling in the photo-transferred casein spots was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) with the appropriate standard manufacturer supplied filter set. ..

Microarray:

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Protein: Detection of the Cy5 fluorescence labeling in the photo-transferred casein spots as well as the Cy3 fluorescence for measuring the bound allergen-specific IgE was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) with the appropriate standard manufacturer supplied filter sets. ..

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Protein: Detection of the directly incorporated tRNA mediated BODIPY-FL fluorescence labeling as well as binding of the fluorescent calcineurin-Cy5 probe was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) using the appropriate standard built-in filter sets to discriminate between the 2 color fluorophores. ..

Article Title: Methods and compositions for phototransfer
Article Snippet: .. When polymerization is complete, imaging will be performed using an ArrayWoRxe BioChip fluorescence microarray reader (Applied Precision, LLC, Issaquah, Wash.). ..

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Quantum Dots: Detection of the Quantum Dot 605 nm fluorescence emissions was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) using the standard built-in (manufacturer supplied) filter sets. .. The Cy3 filter set was used here to selectively image the Quantum Dot fluorescence.

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Protein: Detection of the Cy5 fluorescence labeling in the photo-transferred casein spots was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) with the appropriate standard manufacturer supplied filter set. ..

Binding Assay:

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Detection of Photo-Transferred Protein: Detection of the directly incorporated tRNA mediated BODIPY-FL fluorescence labeling as well as binding of the fluorescent calcineurin-Cy5 probe was achieved by imaging the dry microarray substrates on an ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) using the appropriate standard built-in filter sets to discriminate between the 2 color fluorophores. ..

Software:

Article Title: Methods and compositions for phototransfer
Article Snippet: .. Individual spot diameters were measured using the manufacturer supplied software for the ArrayWoRxe BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) and were approximately 100 microns. ..

other:

Article Title: Method for diagnosing primary biliary cirrhosis (PBC) using novel autoantigens
Article Snippet: Microarrays were imaged on an ARRAYWORX®E BioChip fluorescence reader (Applied Precision, LLC, Issaquah, Wash.) using the appropriate standard built-in filter sets.

Quantitation Assay:

Article Title: Novel biotechnological platform based on baculovirus occlusion bodies carrying Babesia bovis small antigenic peptides for the design of a diagnostic enzyme-linked immunosorbent assay (ELISA).
Article Snippet: Baculoviruses are large DNA virus of insects principally employed in recombinant protein expression.. Its ability to form occlusion bodies (OBs), which are composed mainly of polyhedrin protein (POLH), makes them biotechnologically attractive, as these crystals (polyhedra) can incorporate foreign peptides and can be easily isolated.. On the other hand, peptide microarrays allow rapid and inexpensive high-throughput serological screening of new candidates to be incorporated to OBs.



Similar Products

90
Applied Precision Inc arrayworx®e biochip fluorescence reader
Arrayworx®E Biochip Fluorescence Reader, supplied by Applied Precision Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/arrayworx%C2%AEe+biochip+reader/arrayworxe+biochip+fluorescence+reader/us11885802-160-5-9
Average 90 stars, based on 1 article reviews
arrayworx®e biochip fluorescence reader - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Applied Precision Inc fluorescent microarray scanner arrayworx e-biochip reader
a) microfluidic design: the device consists of two PDMS layers: flow (blue) and control (red). The chip is an array of eight rows by 48 columns for 384 unit cells. Each unit cell is composed of: two antibody chambers divided by a reaction chamber (1–2), 4 MITOMI buttons (3), a valve that segregates the unit cells (4), a valve that separates antibody and reaction chambers (5) and a valve for releasing pressure in the antibody chambers (6). b) The PDMS chip is aligned to an epoxy-functionalized slide onto which primary and secondary antibodies were spotted. c) Assay details: schematic of the unit cell and cross section of a button region: i) functionalization of the surface: BSA-biotin is flowed though the chip followed by neutravidin. Next, the buttons are closed and BSA-biotin flowed again to passivate all neutravidin molecules except for those located underneath the MITOMI buttons, ii) the biotinylated primary antibody is allowed to diffuse into the MITOMI detection chamber and is bound by neutravidin immobilizing it in the MITOMI detection regions, iii) the sample is flown through the device and antigens are captured by the surface immobilized antibodies, iv) finally, the fluorescently labeled secondary antibody is allowed to diffuse into the MITOMI area, binds to the antigen if present, and is trapped by MITOMI. The entire device is then quantitated using a DNA <t>microarray</t> scanner.
Fluorescent Microarray Scanner Arrayworx E Biochip Reader, supplied by Applied Precision Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/arrayworx%C2%AEe+biochip+reader/fluorescent+microarray+scanner+arrayworx+e+biochip+reader/pmc04334502-73-7-13
Average 90 stars, based on 1 article reviews
fluorescent microarray scanner arrayworx e-biochip reader - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Applied Precision Inc laser scanner arrayworx e standard biochip reader
a) microfluidic design: the device consists of two PDMS layers: flow (blue) and control (red). The chip is an array of eight rows by 48 columns for 384 unit cells. Each unit cell is composed of: two antibody chambers divided by a reaction chamber (1–2), 4 MITOMI buttons (3), a valve that segregates the unit cells (4), a valve that separates antibody and reaction chambers (5) and a valve for releasing pressure in the antibody chambers (6). b) The PDMS chip is aligned to an epoxy-functionalized slide onto which primary and secondary antibodies were spotted. c) Assay details: schematic of the unit cell and cross section of a button region: i) functionalization of the surface: BSA-biotin is flowed though the chip followed by neutravidin. Next, the buttons are closed and BSA-biotin flowed again to passivate all neutravidin molecules except for those located underneath the MITOMI buttons, ii) the biotinylated primary antibody is allowed to diffuse into the MITOMI detection chamber and is bound by neutravidin immobilizing it in the MITOMI detection regions, iii) the sample is flown through the device and antigens are captured by the surface immobilized antibodies, iv) finally, the fluorescently labeled secondary antibody is allowed to diffuse into the MITOMI area, binds to the antigen if present, and is trapped by MITOMI. The entire device is then quantitated using a DNA <t>microarray</t> scanner.
Laser Scanner Arrayworx E Standard Biochip Reader, supplied by Applied Precision Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/arrayworx%C2%AEe+biochip+reader/modified+biochip+scanner+arrayworx/pmc03236191-218-7-14
Average 90 stars, based on 1 article reviews
laser scanner arrayworx e standard biochip reader - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Applied Precision Inc arrayworx®e biochip reader
a) microfluidic design: the device consists of two PDMS layers: flow (blue) and control (red). The chip is an array of eight rows by 48 columns for 384 unit cells. Each unit cell is composed of: two antibody chambers divided by a reaction chamber (1–2), 4 MITOMI buttons (3), a valve that segregates the unit cells (4), a valve that separates antibody and reaction chambers (5) and a valve for releasing pressure in the antibody chambers (6). b) The PDMS chip is aligned to an epoxy-functionalized slide onto which primary and secondary antibodies were spotted. c) Assay details: schematic of the unit cell and cross section of a button region: i) functionalization of the surface: BSA-biotin is flowed though the chip followed by neutravidin. Next, the buttons are closed and BSA-biotin flowed again to passivate all neutravidin molecules except for those located underneath the MITOMI buttons, ii) the biotinylated primary antibody is allowed to diffuse into the MITOMI detection chamber and is bound by neutravidin immobilizing it in the MITOMI detection regions, iii) the sample is flown through the device and antigens are captured by the surface immobilized antibodies, iv) finally, the fluorescently labeled secondary antibody is allowed to diffuse into the MITOMI area, binds to the antigen if present, and is trapped by MITOMI. The entire device is then quantitated using a DNA <t>microarray</t> scanner.
Arrayworx®E Biochip Reader, supplied by Applied Precision Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/arrayworx%C2%AEe+biochip+reader/arrayworx+biochip+reader/pm19908751-62-12-15
Average 90 stars, based on 1 article reviews
arrayworx®e biochip reader - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Applied Precision Inc arrayworx e biochip reader
a) microfluidic design: the device consists of two PDMS layers: flow (blue) and control (red). The chip is an array of eight rows by 48 columns for 384 unit cells. Each unit cell is composed of: two antibody chambers divided by a reaction chamber (1–2), 4 MITOMI buttons (3), a valve that segregates the unit cells (4), a valve that separates antibody and reaction chambers (5) and a valve for releasing pressure in the antibody chambers (6). b) The PDMS chip is aligned to an epoxy-functionalized slide onto which primary and secondary antibodies were spotted. c) Assay details: schematic of the unit cell and cross section of a button region: i) functionalization of the surface: BSA-biotin is flowed though the chip followed by neutravidin. Next, the buttons are closed and BSA-biotin flowed again to passivate all neutravidin molecules except for those located underneath the MITOMI buttons, ii) the biotinylated primary antibody is allowed to diffuse into the MITOMI detection chamber and is bound by neutravidin immobilizing it in the MITOMI detection regions, iii) the sample is flown through the device and antigens are captured by the surface immobilized antibodies, iv) finally, the fluorescently labeled secondary antibody is allowed to diffuse into the MITOMI area, binds to the antigen if present, and is trapped by MITOMI. The entire device is then quantitated using a DNA <t>microarray</t> scanner.
Arrayworx E Biochip Reader, supplied by Applied Precision Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/arrayworx%C2%AEe+biochip+reader/arrayworx+biochip+reader/pmc02784287-369-46-50
Average 90 stars, based on 1 article reviews
arrayworx e biochip reader - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Applied Precision Inc arrayworx e auto biochip reader
a) microfluidic design: the device consists of two PDMS layers: flow (blue) and control (red). The chip is an array of eight rows by 48 columns for 384 unit cells. Each unit cell is composed of: two antibody chambers divided by a reaction chamber (1–2), 4 MITOMI buttons (3), a valve that segregates the unit cells (4), a valve that separates antibody and reaction chambers (5) and a valve for releasing pressure in the antibody chambers (6). b) The PDMS chip is aligned to an epoxy-functionalized slide onto which primary and secondary antibodies were spotted. c) Assay details: schematic of the unit cell and cross section of a button region: i) functionalization of the surface: BSA-biotin is flowed though the chip followed by neutravidin. Next, the buttons are closed and BSA-biotin flowed again to passivate all neutravidin molecules except for those located underneath the MITOMI buttons, ii) the biotinylated primary antibody is allowed to diffuse into the MITOMI detection chamber and is bound by neutravidin immobilizing it in the MITOMI detection regions, iii) the sample is flown through the device and antigens are captured by the surface immobilized antibodies, iv) finally, the fluorescently labeled secondary antibody is allowed to diffuse into the MITOMI area, binds to the antigen if present, and is trapped by MITOMI. The entire device is then quantitated using a DNA <t>microarray</t> scanner.
Arrayworx E Auto Biochip Reader, supplied by Applied Precision Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/arrayworx%C2%AEe+biochip+reader/arrayworx+biochip+reader/pmc02266772-226-6-11
Average 90 stars, based on 1 article reviews
arrayworx e auto biochip reader - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

Image Search Results


a) microfluidic design: the device consists of two PDMS layers: flow (blue) and control (red). The chip is an array of eight rows by 48 columns for 384 unit cells. Each unit cell is composed of: two antibody chambers divided by a reaction chamber (1–2), 4 MITOMI buttons (3), a valve that segregates the unit cells (4), a valve that separates antibody and reaction chambers (5) and a valve for releasing pressure in the antibody chambers (6). b) The PDMS chip is aligned to an epoxy-functionalized slide onto which primary and secondary antibodies were spotted. c) Assay details: schematic of the unit cell and cross section of a button region: i) functionalization of the surface: BSA-biotin is flowed though the chip followed by neutravidin. Next, the buttons are closed and BSA-biotin flowed again to passivate all neutravidin molecules except for those located underneath the MITOMI buttons, ii) the biotinylated primary antibody is allowed to diffuse into the MITOMI detection chamber and is bound by neutravidin immobilizing it in the MITOMI detection regions, iii) the sample is flown through the device and antigens are captured by the surface immobilized antibodies, iv) finally, the fluorescently labeled secondary antibody is allowed to diffuse into the MITOMI area, binds to the antigen if present, and is trapped by MITOMI. The entire device is then quantitated using a DNA microarray scanner.

Journal: PLoS ONE

Article Title: A Microfluidic Platform for High-Throughput Multiplexed Protein Quantitation

doi: 10.1371/journal.pone.0117744

Figure Lengend Snippet: a) microfluidic design: the device consists of two PDMS layers: flow (blue) and control (red). The chip is an array of eight rows by 48 columns for 384 unit cells. Each unit cell is composed of: two antibody chambers divided by a reaction chamber (1–2), 4 MITOMI buttons (3), a valve that segregates the unit cells (4), a valve that separates antibody and reaction chambers (5) and a valve for releasing pressure in the antibody chambers (6). b) The PDMS chip is aligned to an epoxy-functionalized slide onto which primary and secondary antibodies were spotted. c) Assay details: schematic of the unit cell and cross section of a button region: i) functionalization of the surface: BSA-biotin is flowed though the chip followed by neutravidin. Next, the buttons are closed and BSA-biotin flowed again to passivate all neutravidin molecules except for those located underneath the MITOMI buttons, ii) the biotinylated primary antibody is allowed to diffuse into the MITOMI detection chamber and is bound by neutravidin immobilizing it in the MITOMI detection regions, iii) the sample is flown through the device and antigens are captured by the surface immobilized antibodies, iv) finally, the fluorescently labeled secondary antibody is allowed to diffuse into the MITOMI area, binds to the antigen if present, and is trapped by MITOMI. The entire device is then quantitated using a DNA microarray scanner.

Article Snippet: The microfluidic device was scanned using a fluorescent microarray scanner (ArrayWorx e-Biochip Reader, Applied Precision, USA).

Techniques: Control, Labeling, Microarray