Review





Similar Products

standard optical laboratory components  (Thorlabs)
86
Thorlabs standard optical laboratory components
(a) Former experimental testbed, demonstrating the use of an optical bench with lens tubes and post holders. The optical bench is a stainless-steel optical baseline used for general photonics experiments and serves as a mounting platform for optical <t>components.</t> While highly stable, it is typically heavy, expensive, and not optimized for confined or vertically aligned NIR transmission through a biological tissue sample. It measures more than 300 mm × 600 mm, which is oversized for in-body OWC experiments and far exceeds the spatial requirements for small tissue samples. Additionally, it is also not easily transportable. Meanwhile, the post holders require careful manual alignment and lack ambient light shielding. The lens tubes, on the other hand, while they do provide a reliable holder for mounted LEDs integrated with post holders, require an additional cost. This makes them less accessible for institutions with limited funding. (b) The illustration of the experimental work conducted in our laboratory followed the safety protocol; a photograph was obtained from . Prof. Marcos Katz and his researcher are shown aligning an optical phantom while wearing certified laser safety glasses (LG9, Thorlabs, USA), which protect against NIR emissions. (c) Practical challenges in the previous optical setup showed manual alignment between the TX and RX. The side view (left): dashed lines illustrate the required strict alignment between the TX’s central beam and the RX’s active area through the optical phantom. Top view (right), emphasizing precise physical centering of the TX relative to the RX.
Standard Optical Laboratory Components, supplied by Thorlabs, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/Optical+Components/components+optical+thorlabs/pmc12887182-3-13-22
Average 86 stars, based on 1 article reviews
standard optical laboratory components - by Bioz Stars, 2026-09
86/100 stars
  Buy from Supplier
optical components  (Thorlabs)
86
Thorlabs optical components
(a) Former experimental testbed, demonstrating the use of an optical bench with lens tubes and post holders. The optical bench is a stainless-steel optical baseline used for general photonics experiments and serves as a mounting platform for optical <t>components.</t> While highly stable, it is typically heavy, expensive, and not optimized for confined or vertically aligned NIR transmission through a biological tissue sample. It measures more than 300 mm × 600 mm, which is oversized for in-body OWC experiments and far exceeds the spatial requirements for small tissue samples. Additionally, it is also not easily transportable. Meanwhile, the post holders require careful manual alignment and lack ambient light shielding. The lens tubes, on the other hand, while they do provide a reliable holder for mounted LEDs integrated with post holders, require an additional cost. This makes them less accessible for institutions with limited funding. (b) The illustration of the experimental work conducted in our laboratory followed the safety protocol; a photograph was obtained from . Prof. Marcos Katz and his researcher are shown aligning an optical phantom while wearing certified laser safety glasses (LG9, Thorlabs, USA), which protect against NIR emissions. (c) Practical challenges in the previous optical setup showed manual alignment between the TX and RX. The side view (left): dashed lines illustrate the required strict alignment between the TX’s central beam and the RX’s active area through the optical phantom. Top view (right), emphasizing precise physical centering of the TX relative to the RX.
Optical Components, supplied by Thorlabs, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/Optical+Components/components+optical+thorlabs/pmc13064616-78-2-6
Average 86 stars, based on 1 article reviews
optical components - by Bioz Stars, 2026-09
86/100 stars
  Buy from Supplier
tl2 assembly optical components  (Thorlabs)
86
Thorlabs tl2 assembly optical components
(a) Former experimental testbed, demonstrating the use of an optical bench with lens tubes and post holders. The optical bench is a stainless-steel optical baseline used for general photonics experiments and serves as a mounting platform for optical <t>components.</t> While highly stable, it is typically heavy, expensive, and not optimized for confined or vertically aligned NIR transmission through a biological tissue sample. It measures more than 300 mm × 600 mm, which is oversized for in-body OWC experiments and far exceeds the spatial requirements for small tissue samples. Additionally, it is also not easily transportable. Meanwhile, the post holders require careful manual alignment and lack ambient light shielding. The lens tubes, on the other hand, while they do provide a reliable holder for mounted LEDs integrated with post holders, require an additional cost. This makes them less accessible for institutions with limited funding. (b) The illustration of the experimental work conducted in our laboratory followed the safety protocol; a photograph was obtained from . Prof. Marcos Katz and his researcher are shown aligning an optical phantom while wearing certified laser safety glasses (LG9, Thorlabs, USA), which protect against NIR emissions. (c) Practical challenges in the previous optical setup showed manual alignment between the TX and RX. The side view (left): dashed lines illustrate the required strict alignment between the TX’s central beam and the RX’s active area through the optical phantom. Top view (right), emphasizing precise physical centering of the TX relative to the RX.
Tl2 Assembly Optical Components, supplied by Thorlabs, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/Optical+Components/components+optical+thorlabs/us12546981-524-2-8
Average 86 stars, based on 1 article reviews
tl2 assembly optical components - by Bioz Stars, 2026-09
86/100 stars
  Buy from Supplier
polarized light optical microscopes  (Olympus)
98
Olympus polarized light optical microscopes
(a) Former experimental testbed, demonstrating the use of an optical bench with lens tubes and post holders. The optical bench is a stainless-steel optical baseline used for general photonics experiments and serves as a mounting platform for optical <t>components.</t> While highly stable, it is typically heavy, expensive, and not optimized for confined or vertically aligned NIR transmission through a biological tissue sample. It measures more than 300 mm × 600 mm, which is oversized for in-body OWC experiments and far exceeds the spatial requirements for small tissue samples. Additionally, it is also not easily transportable. Meanwhile, the post holders require careful manual alignment and lack ambient light shielding. The lens tubes, on the other hand, while they do provide a reliable holder for mounted LEDs integrated with post holders, require an additional cost. This makes them less accessible for institutions with limited funding. (b) The illustration of the experimental work conducted in our laboratory followed the safety protocol; a photograph was obtained from . Prof. Marcos Katz and his researcher are shown aligning an optical phantom while wearing certified laser safety glasses (LG9, Thorlabs, USA), which protect against NIR emissions. (c) Practical challenges in the previous optical setup showed manual alignment between the TX and RX. The side view (left): dashed lines illustrate the required strict alignment between the TX’s central beam and the RX’s active area through the optical phantom. Top view (right), emphasizing precise physical centering of the TX relative to the RX.
Polarized Light Optical Microscopes, supplied by Olympus, used in various techniques. Bioz Stars score: 98/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/Optical+Components/Optical+Microscope+Frames+OEM+Components/pmc12784327-63-18-23
Average 98 stars, based on 1 article reviews
polarized light optical microscopes - by Bioz Stars, 2026-09
98/100 stars
  Buy from Supplier
optical components 330  (Thorlabs)
86
Thorlabs optical components 330
(a) Former experimental testbed, demonstrating the use of an optical bench with lens tubes and post holders. The optical bench is a stainless-steel optical baseline used for general photonics experiments and serves as a mounting platform for optical <t>components.</t> While highly stable, it is typically heavy, expensive, and not optimized for confined or vertically aligned NIR transmission through a biological tissue sample. It measures more than 300 mm × 600 mm, which is oversized for in-body OWC experiments and far exceeds the spatial requirements for small tissue samples. Additionally, it is also not easily transportable. Meanwhile, the post holders require careful manual alignment and lack ambient light shielding. The lens tubes, on the other hand, while they do provide a reliable holder for mounted LEDs integrated with post holders, require an additional cost. This makes them less accessible for institutions with limited funding. (b) The illustration of the experimental work conducted in our laboratory followed the safety protocol; a photograph was obtained from . Prof. Marcos Katz and his researcher are shown aligning an optical phantom while wearing certified laser safety glasses (LG9, Thorlabs, USA), which protect against NIR emissions. (c) Practical challenges in the previous optical setup showed manual alignment between the TX and RX. The side view (left): dashed lines illustrate the required strict alignment between the TX’s central beam and the RX’s active area through the optical phantom. Top view (right), emphasizing precise physical centering of the TX relative to the RX.
Optical Components 330, supplied by Thorlabs, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/Optical+Components/components+optical+thorlabs/pm41285856-183-14-17
Average 86 stars, based on 1 article reviews
optical components 330 - by Bioz Stars, 2026-09
86/100 stars
  Buy from Supplier
thorlabs optical components  (Thorlabs)
86
Thorlabs thorlabs optical components
(a) Former experimental testbed, demonstrating the use of an optical bench with lens tubes and post holders. The optical bench is a stainless-steel optical baseline used for general photonics experiments and serves as a mounting platform for optical <t>components.</t> While highly stable, it is typically heavy, expensive, and not optimized for confined or vertically aligned NIR transmission through a biological tissue sample. It measures more than 300 mm × 600 mm, which is oversized for in-body OWC experiments and far exceeds the spatial requirements for small tissue samples. Additionally, it is also not easily transportable. Meanwhile, the post holders require careful manual alignment and lack ambient light shielding. The lens tubes, on the other hand, while they do provide a reliable holder for mounted LEDs integrated with post holders, require an additional cost. This makes them less accessible for institutions with limited funding. (b) The illustration of the experimental work conducted in our laboratory followed the safety protocol; a photograph was obtained from . Prof. Marcos Katz and his researcher are shown aligning an optical phantom while wearing certified laser safety glasses (LG9, Thorlabs, USA), which protect against NIR emissions. (c) Practical challenges in the previous optical setup showed manual alignment between the TX and RX. The side view (left): dashed lines illustrate the required strict alignment between the TX’s central beam and the RX’s active area through the optical phantom. Top view (right), emphasizing precise physical centering of the TX relative to the RX.
Thorlabs Optical Components, supplied by Thorlabs, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/Optical+Components/components+optical+thorlabs/pm41251514-465-10-10
Average 86 stars, based on 1 article reviews
thorlabs optical components - by Bioz Stars, 2026-09
86/100 stars
  Buy from Supplier
professional grade optical components  (Euromex Microscopen)
86
Euromex Microscopen professional grade optical components
(a) Former experimental testbed, demonstrating the use of an optical bench with lens tubes and post holders. The optical bench is a stainless-steel optical baseline used for general photonics experiments and serves as a mounting platform for optical <t>components.</t> While highly stable, it is typically heavy, expensive, and not optimized for confined or vertically aligned NIR transmission through a biological tissue sample. It measures more than 300 mm × 600 mm, which is oversized for in-body OWC experiments and far exceeds the spatial requirements for small tissue samples. Additionally, it is also not easily transportable. Meanwhile, the post holders require careful manual alignment and lack ambient light shielding. The lens tubes, on the other hand, while they do provide a reliable holder for mounted LEDs integrated with post holders, require an additional cost. This makes them less accessible for institutions with limited funding. (b) The illustration of the experimental work conducted in our laboratory followed the safety protocol; a photograph was obtained from . Prof. Marcos Katz and his researcher are shown aligning an optical phantom while wearing certified laser safety glasses (LG9, Thorlabs, USA), which protect against NIR emissions. (c) Practical challenges in the previous optical setup showed manual alignment between the TX and RX. The side view (left): dashed lines illustrate the required strict alignment between the TX’s central beam and the RX’s active area through the optical phantom. Top view (right), emphasizing precise physical centering of the TX relative to the RX.
Professional Grade Optical Components, supplied by Euromex Microscopen, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/Optical+Components/components+grade+optical+professional/pm41219216-157-11-32
Average 86 stars, based on 1 article reviews
professional grade optical components - by Bioz Stars, 2026-09
86/100 stars
  Buy from Supplier
opticalmicroscope  (Olympus)
98
Olympus opticalmicroscope
(a) Former experimental testbed, demonstrating the use of an optical bench with lens tubes and post holders. The optical bench is a stainless-steel optical baseline used for general photonics experiments and serves as a mounting platform for optical <t>components.</t> While highly stable, it is typically heavy, expensive, and not optimized for confined or vertically aligned NIR transmission through a biological tissue sample. It measures more than 300 mm × 600 mm, which is oversized for in-body OWC experiments and far exceeds the spatial requirements for small tissue samples. Additionally, it is also not easily transportable. Meanwhile, the post holders require careful manual alignment and lack ambient light shielding. The lens tubes, on the other hand, while they do provide a reliable holder for mounted LEDs integrated with post holders, require an additional cost. This makes them less accessible for institutions with limited funding. (b) The illustration of the experimental work conducted in our laboratory followed the safety protocol; a photograph was obtained from . Prof. Marcos Katz and his researcher are shown aligning an optical phantom while wearing certified laser safety glasses (LG9, Thorlabs, USA), which protect against NIR emissions. (c) Practical challenges in the previous optical setup showed manual alignment between the TX and RX. The side view (left): dashed lines illustrate the required strict alignment between the TX’s central beam and the RX’s active area through the optical phantom. Top view (right), emphasizing precise physical centering of the TX relative to the RX.
Opticalmicroscope, supplied by Olympus, used in various techniques. Bioz Stars score: 98/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/Optical+Components/Optical+Microscope+Frames+OEM+Components/pm41102188-445-6-7
Average 98 stars, based on 1 article reviews
opticalmicroscope - by Bioz Stars, 2026-09
98/100 stars
  Buy from Supplier
optical components  (Edmund Optics)
86
Edmund Optics optical components
(a) Former experimental testbed, demonstrating the use of an optical bench with lens tubes and post holders. The optical bench is a stainless-steel optical baseline used for general photonics experiments and serves as a mounting platform for optical <t>components.</t> While highly stable, it is typically heavy, expensive, and not optimized for confined or vertically aligned NIR transmission through a biological tissue sample. It measures more than 300 mm × 600 mm, which is oversized for in-body OWC experiments and far exceeds the spatial requirements for small tissue samples. Additionally, it is also not easily transportable. Meanwhile, the post holders require careful manual alignment and lack ambient light shielding. The lens tubes, on the other hand, while they do provide a reliable holder for mounted LEDs integrated with post holders, require an additional cost. This makes them less accessible for institutions with limited funding. (b) The illustration of the experimental work conducted in our laboratory followed the safety protocol; a photograph was obtained from . Prof. Marcos Katz and his researcher are shown aligning an optical phantom while wearing certified laser safety glasses (LG9, Thorlabs, USA), which protect against NIR emissions. (c) Practical challenges in the previous optical setup showed manual alignment between the TX and RX. The side view (left): dashed lines illustrate the required strict alignment between the TX’s central beam and the RX’s active area through the optical phantom. Top view (right), emphasizing precise physical centering of the TX relative to the RX.
Optical Components, supplied by Edmund Optics, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/Optical+Components/components/sec_filing____730716_slash_000093041312005260_slash_c70935_10___k-376-14-6
Average 86 stars, based on 1 article reviews
optical components - by Bioz Stars, 2026-09
86/100 stars
  Buy from Supplier

Image Search Results


(a) Former experimental testbed, demonstrating the use of an optical bench with lens tubes and post holders. The optical bench is a stainless-steel optical baseline used for general photonics experiments and serves as a mounting platform for optical components. While highly stable, it is typically heavy, expensive, and not optimized for confined or vertically aligned NIR transmission through a biological tissue sample. It measures more than 300 mm × 600 mm, which is oversized for in-body OWC experiments and far exceeds the spatial requirements for small tissue samples. Additionally, it is also not easily transportable. Meanwhile, the post holders require careful manual alignment and lack ambient light shielding. The lens tubes, on the other hand, while they do provide a reliable holder for mounted LEDs integrated with post holders, require an additional cost. This makes them less accessible for institutions with limited funding. (b) The illustration of the experimental work conducted in our laboratory followed the safety protocol; a photograph was obtained from . Prof. Marcos Katz and his researcher are shown aligning an optical phantom while wearing certified laser safety glasses (LG9, Thorlabs, USA), which protect against NIR emissions. (c) Practical challenges in the previous optical setup showed manual alignment between the TX and RX. The side view (left): dashed lines illustrate the required strict alignment between the TX’s central beam and the RX’s active area through the optical phantom. Top view (right), emphasizing precise physical centering of the TX relative to the RX.

Journal: HardwareX

Article Title: Open-source, low-cost 3D-printable testbed for in-body optical wireless communications research

doi: 10.1016/j.ohx.2026.e00744

Figure Lengend Snippet: (a) Former experimental testbed, demonstrating the use of an optical bench with lens tubes and post holders. The optical bench is a stainless-steel optical baseline used for general photonics experiments and serves as a mounting platform for optical components. While highly stable, it is typically heavy, expensive, and not optimized for confined or vertically aligned NIR transmission through a biological tissue sample. It measures more than 300 mm × 600 mm, which is oversized for in-body OWC experiments and far exceeds the spatial requirements for small tissue samples. Additionally, it is also not easily transportable. Meanwhile, the post holders require careful manual alignment and lack ambient light shielding. The lens tubes, on the other hand, while they do provide a reliable holder for mounted LEDs integrated with post holders, require an additional cost. This makes them less accessible for institutions with limited funding. (b) The illustration of the experimental work conducted in our laboratory followed the safety protocol; a photograph was obtained from . Prof. Marcos Katz and his researcher are shown aligning an optical phantom while wearing certified laser safety glasses (LG9, Thorlabs, USA), which protect against NIR emissions. (c) Practical challenges in the previous optical setup showed manual alignment between the TX and RX. The side view (left): dashed lines illustrate the required strict alignment between the TX’s central beam and the RX’s active area through the optical phantom. Top view (right), emphasizing precise physical centering of the TX relative to the RX.

Article Snippet: Closest commercial analog , The closest commercial platforms to the proposed testbed include standard optical laboratory components, i.e., optical breadboards/benches (e.g., MB3060/M, Thorlabs, USA) + post holders (e.g., MSL2 or MSL3, Thorlabs, USA) + lens tubes (e.g., SM1TC, Thorlabs, USA)..

Techniques: Transmission Assay

A photograph showing all components is printed: (a) Top ; (b) Chassis ; (c) Leg_3mm ; (d) Leg_20mm .

Journal: HardwareX

Article Title: Open-source, low-cost 3D-printable testbed for in-body optical wireless communications research

doi: 10.1016/j.ohx.2026.e00744

Figure Lengend Snippet: A photograph showing all components is printed: (a) Top ; (b) Chassis ; (c) Leg_3mm ; (d) Leg_20mm .

Article Snippet: Closest commercial analog , The closest commercial platforms to the proposed testbed include standard optical laboratory components, i.e., optical breadboards/benches (e.g., MB3060/M, Thorlabs, USA) + post holders (e.g., MSL2 or MSL3, Thorlabs, USA) + lens tubes (e.g., SM1TC, Thorlabs, USA)..

Techniques: