3d model simulating the debinding process (COMSOL Inc)
Structured Review

3d Model Simulating The Debinding Process, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+simulation+model/3d+model+simulating+the+debinding+process/pmc08913829-66-22-27
Average 90 stars, based on 1 article reviews
Images
1) Product Images from "Production of a monolithic fuel cell stack with high power density"
Article Title: Production of a monolithic fuel cell stack with high power density
Journal: Nature Communications
doi: 10.1038/s41467-022-28970-w
Figure Legend Snippet: The graphs display the predictions of a multiphysics model on the pressure built-up inside the SRU monoliths (black lines/symbols) during the debinding step (red lines). Below the graphs, the photographs show the integrity of the corresponding SRU monoliths after heat treatment (debinding and sintering steps). a , Case of a SRU monolith manufactured using only graphite as sacrificial material to form the gas channels, b , Case of a SRU monolith manufactured using a 50–50 vol.% mixture of graphite–PMMA as sacrificial material to form the gas channels, and c , Case of a SRU monolith manufactured using only PMMA as sacrificial material to form the gas channels. The SRU presented in Fig. 2c reveals large cracks after debinding/sintering steps which is in good accordance with the model which predicted that SRU monolith manufactured using 100% PMMA would lead to the highest pressure (14 mbar around 200 °C) among the three pore-forming agents investigated, and therefore will be the most likely to fracture. Note that both PMMA and graphite are also contained the electrode tapes which explains why a pressure peak corresponding to graphite removal can also be found in the case of Fig. 2c, for example.
Techniques Used:
Related Articles
other:Article Title: High-power density monolithic fuel cell stack Article Snippet: To identify the process parameters required to achieve an optimized monolith (avoiding disintegration and warpage during debinding), a 3D model simulating the debinding process was developed using Article Title: Production of a monolithic fuel cell stack with high power density Article Snippet: To identify the process parameters required to achieve an optimized monolith (avoiding disintegration and warpage during debinding), a 3D model simulating the debinding process was developed using |
